User Manual HWAM® SmartControl™ Generation 2

21
1
2
3
1
Lighting up
The lighting up symbol is displayed until the
fire is well underway and the flue gases have
reached a suciently high temperature.
2
Combustion
When a sucient flue gas temperature is
reached, HWAM® SmartControl™ changes phase
from lighting up to combustion. HWAM® Smart-
Control™ will typically run in this phase most of
the time.
3
Ember phase
When most of the wood is burned, HWAM®
SmartControl™ switches to ember phase and will
now display the estimated time remaining until
the next restoking. If there is a big dierence
between actual and desired room temperature,
the restoking alarm comes on, even though
there is unburned wood and flames. Failure to
restoke at this time will lead to a new restoking
alarm being emitted, which constitutes the last
opportunity to restoke without new lighting up.
NOTE: The time left to restoking is an approx-
imate time and may vary depending on the
circumstances.
Combustion phases