User Manual HWAM® SmartControl™ Generation 2

3
App Store: Google Play Store:
The following sections will provide an introduction to the HWAM® SmartControl™ app named
IHS SmartControl™ and the associated wireless room temperature sensor, and how they
operate.
HWAM® SmartControl™ provides a number of advantages:
• It’s the most environmentally friendly way to heat the stove
• Saves up to  percent of the cost of the firewood
• Provides an even temperature in the room
• Makes it easy to fire
• Optional night-time lowering where the fire attenuates and the heat emanates
from the embers in an environmental way
• Signals when new wood is required
INSTALLATION INSTRUCTIONS
Before using the stove, it is important that the following steps are taken:
1
Make sure there is no power connected to HWAM® SmartStove™.
2
Put  of the  AA batteries in the room temperature sensor. Press the button on the front
of the room temperature sensor while the third battery is being placed inside, and hold
until the LED flashes green signalling that it is ready to be paired with the stove. See also
the section on the pairing of the room temperature sensor with HWAM® SmartControl
TM
on
page . Do not use rechargeable batteries.
3
Plug in the HWAM® SmartStove™ immediately using the power supply.
4
Allow the system to boot up for the first time, this takes about  minute. The green diode
on the room temperature sensor will briefly turn solid green and then turn o when the
room temperature sensor has automatically been successfully paired with the stove.
5
The HWAM® SmartControl™ can be used with a smartphone or tablet that uses the operat-
ing system iOS or Android. To download the app search for IHS Smart Control™ In the App
Store or Google Play Store or scan the QR code below.
Introduction to HWAM
®
SmartControl
TM
Before using HWAM
®
SmartControl
TM