User Manual HWAM® SmartControl™ Generation 2

4
Wi-Fi Direct
Wi-Fi network
Setup
You can set up HWAM® SmartControl™ via the IHS
SmartControl™ app and you can only do this using an
iPhone, iPad or Android device.
PCs or MACs cannot be used to setup the system.
Information about the Wi-Fi connection
HWAM® SmartControl™ can be configured to commu-
nicate directly with mobile devices or through a Wi-Fi
network.
It is best to connect a Wi-Fi network as this is the most
advantageous and the most user-friendly use of the
system.
HWAM® SmartControl™ supports  stoves on the same
network.
1-2 units
up to 5 units
Introduction
The following sections describe how the HWAM® SmartControl™ is connected to a Wi-Fi net-
work or via Wi-Fi Direct.
It is always best to connect the system to a Wi-Fi network, as this ensures the best connec-
tion to the system and the simplest operation. It is not necessary to connect to the Internet in
order to use HWAM® SmartControl™ or HWAM® SmartStove™ on a wireless network.
First Setup