User Manual HWAM® SmartControl™ Generation 2

6
3
1
2
1
2
3
1
Connecting to Wi-Fi networks
After the mobile device is connected via Wi-Fi Direct,
HWAM® SmartControl™ can be connected to a Wi-Fi
network. To connect a Wi-Fi network, press the green
connection icon
1
.
If you wish to connect HWAM® SmartControl™ to the
network, click "Yes"
2
. This is recommended.
Enter the name of the stove for example: "Living room"
or "First floor."
3
NOTE: The name is used primarily when there are
multiple stoves connected to the same network.
HWAM® SmartControl™ will now search for all available
networks.
Make sure that your network is turned on and accessi-
ble and that your SSID is visible (Service Set Identifier).
NOTE: If there are many available networks, this
can take a while.
Select the network that HWAM® SmartControl™ shall be
connected to
1
.
Enter the password for the selected network
2
, and
press "Connect to network"
3
.
HWAM® SmartControl™ will now try to connect to the
selected network using the code entered.
HWAM® SmartControl™ is now connected to the selec-
ted network. It is no longer possible to access HWAM®
SmartControl™ via Wi-Fi Direct. HWAM® SmartControl™
can only be operated by connecting the mobile device
to the same network as the HWAM® SmartControl™.
If HWAM® SmartControl™ cannot connect to the net-
work, the Wi-Fi Direct connection will automatically
become available again.
NOTE: For servicing the Wi-Fi Direct connection
will be available for one minute after the system has
been restarted.