Technical Specifications

D
A
Jet &
Control
placement
may vary
35.5"
135º
21.25" 16.5" 19.25"
9"
Backrest angle
NOTE:
Graphics may not be to scale. Specications and features are subject to change without notice and are ± .25”. All nal measurements should be taken
from tub on site. Access 18”x 18” or larger is required for each pump. Some pump locations and plumbing may extend beyond the perimeter of the bath.
Hydromassage Products LLC • 303-341-1845 | FAX: [phone] • www.hydromassageproducts.com
X HTT® Leg Therapy Air Massage System includes 10 Air Jets on the
oor. Optional on Combo Plat and Combo Gold Series
X 6 Jet HTT® Back Massage System: N/A on Combo Series-Standard
on Plat series
Warm Back Tubing Zone
A
B
C
BATHERS: 1
INSTALLATION
• DECK (D)
UNDER MOUNT (U)
• ALCOVE (A)
FREESTANDING (F)
CLAWFOOT (L)
PEDESTAL (P)
raised headrest
lip prole
radius corner
lip prole
Serenity SEAG7236 72" x 36" x 21"
PRODUCT NUMBER: SEAG7236
AIR GOLD SERIES
TECHNICAL SPECIFICATIONS
Drain End drain
Pump Location(s): Select 1 Std. = Standard / Alt LF/RF Optional
Bath Weight (empty) 160 lbs
Gallons to Operate 54-72
ELECTRICAL SPECIFICATIONS
Motor/Pump (1) 115v 20AMP GFCI Circuits
STANDARD FEATURES & ACCESSORIES for AIR GOLD SERIES BATHS ______
OPTIONAL FEATURES & ACCESSORIES
(Please type in the box below)
X
Bath include EZ Level Legs
INSTALLATION WILL NOT REQUIRE MORTAR BEDDING
JETS
18 EZ Clean™ Air Jets on Sidewall
PUMPS
1.25 Air Power Variable Speed, Pulse & Wave heated Air Pump
Quiet Pad Anti-Vibration Mounted Pump
HEATERS
Warm Back Rest Tubing Zone
CONTROLS
Air Switch On/Off Control(s) for mood lighting
Variable Speed Air Massage Control
Automatic Purge & Dry Cycle Control
PURITY
HydroCleanse
STANDARD ACCESSORIES
Mood Light
Lift & Turn Drain - White, Biscuit, Bone, Brushed Nickel,
Oil Rubbed Bronze, Polished Chrome
Deluxe Cushion Pillow
EZ Level Adjustable Legs
FDA Recipe Non-Toxic Food & Beverage Grade Plumbing (primarily)
30 Point Quality Assurance Factory Test
REQUIREMENTS
Pump Locations: Select 1
Electrical: one 115v 20AMP GFCI Circuits
Drain: Select Color / Finish
Tub should not be supported by the lip in any way. Level tub &
screw or glue EZ Level adjustable legs to sub oor.
CUT OUT DIMENSIONS:
OVALS: A template will be provided
RECTANGLES: Subtract 1” to 1.5” from length & width for hole
cut out size
EZ CLEAN CAST ACRYLIC
LIMITED LIFETIME WARRANTY
ANSI