Technical Specifications

Tiany 5930 | Air A12 Massage Series
Product Number: TIA12J5930CDFS 59” x 30” x 24”
TECHNICAL SPECIFICATIONS
Center drain.
Pump Location: Remote only
ELECTRICAL REQUIREMENTS
( 1 ) 115v 20AMP GFCI Circuit
STANDARD & OPTIONAL ACCESSORIES
JETS: 12 Total
❍ 12 Classic Air Jets
PUMPS
Air Pump Remote
CONTROLS
Remote Control
PURITY
HydroCleanse
FAUCET INFORMATION
• Floor mount – verify spout distance
Specifications and features are subject to change without notice and are + .25”. All final measurements should be taken from tub on site.
HydroMassage Products LLC • 303-341-1845 • Fax: [phone] • www.hydromassageproducts.com
23-1/2”
29-1/2”
18-1/8” 18-1/2”
29-1/2”
59”
14-3/4”
29-1/2”
18”
37”
120°
120°
45”
23-1/4”
3-1/2”
16”
STANDARD ACCESSORIES
EZ Level Base • FDA Recipe Non-Toxic Food & Beverage Grade
Plumbing (primarily) • 30 Point Quality Assurance Factory Test
DRAINS & OVERFLOWS INFORMATION
• Overflow: Integral Linear: Included- Polished Chrome or
Brushed Nickel. Optional - White.
• Bath Drain: Pop up: Included- Polished Chrome or
Brushed Nickel. Optional - White.
• In Floor Drain EZ Fast Connect (optional)
FS
ADDITIONAL INFORMATION
6 1/2" or more space required to access equipment panel. Tub
may also need to be shifted or disconnected in some situations.
Access panel equipment design and location may vary based
on model.
Your licensed installer must water test and run all equipment
before leaving your home to ensure proper operation and
validate warranty.