User manual

Connections and Switches on the Receiver
Hyperion receivers have connections, plug orientation and switch function
identified on the PC board or case. The positive pins for all channels (and the
bind slot) are connected together, as are all the ground pins; power can be
applied to any set of pins and if necessary a Y-cable can be used.
Only use a DSMX-compatible satellite with this receiver. It is also available in a
diversity antenna version.
Input voltage: 3.45 ~ 10.2v
6. Failsafe
The primary purpose of failsafe is to minimize the risk of injury and damage
should the receiver lose signal while the model is powered up, whether flying or
on the ground. The key safety requirement is that the motor be shut down on
loss of signal.
Two types of failsafe are used by the various Hyperion receivers: