User Manual

16
To accept all tuning options, press ‘Accept’ to begin the programming process. To make changes to any option,
select ‘Change’.
PRESET TUNE
The programmer allows you to save up to 5 preset tunes. This feature will save a specific selection of
programming options in the programmer memory. The preset tune can be selected from the Tuning Menu. If
you wish to save the currently selected tuning options as a Preset Tune, select ‘Yes’. If you don’t want to save
the selected options as a preset tune, select ‘No’.
To save the currently selected tuning options, use the buttons to the right of the screen to scroll up or down and
select any combination of letters or numbers. The ‘Prev’ and ‘Next’ buttons move the cursor left and right.
Once you have selected a name, press ‘Done’ to continue.
PROGRAMMING
Follow all of the messages on the programmer screen during the entire programming process for the vehicle.
The programmer will prompt you to turn the key to the ‘RUN’ and ‘OFF’ position during this process. When
turning the key to the ‘RUN’ position, it is important to make sure that you turn the key to the most forward
position possible WITHOUT starting the vehicle.
IMPORTANT NOTE:
While the unit is programming, the following is EXTREMELY IMPORTANT: DO NOT leave the vehicle
while programming is in process. DO NOT unplug or disturb the cable, or turn the key off (unless instructed to
by the programmer). DO NOT START THE VEHICLE AT ANY TIME WHILE THE PROGRAMMER