User Manual

32
1. Install the Tuner Update Software.
The Tuner Update Software can be installed on any Windows based PC from the same CD that these
instructions are located, or it can be downloaded from the Hypertech website at the link below. Note: The
Tuner Update Software is not compatible on Apple/MAC operating systems.
http://www.webservice99.com/downloads/tunerupdateapplication/V2/Current/UpdateInstallV2.exe
2. Connect the programmer to the PC with the supplied USB cable.
3. Open the Tuner Update Application software from the PC.
Once the update software is installed, there will be a shortcut installed on your desktop. Double click the
shortcut to start the program.
4. Click the ‘Update Tuner’ button, and follow the instructions on the screen.
SECTION 5: PRODUCT WARRANTY & CONTACT INFO
5-1: Factory Direct Limited Lifetime Warranty
This programmer is warranted against defects in materials or workmanship. The liability under this warranty
shall be limited to the prompt correction or replacement of any defective part of the product which is
determined to be necessary. This Limited Lifetime Warranty is to the ORIGINAL purchaser for as long as he or
she owns the vehicle on which the product is originally installed, providing all the information requested is
furnished. A copy of the original sales invoice or receipt MUST be retained. Without proper documentation, a
service fee will be applied. Resold units and/or units with more than one Vehicle Identification Number (VIN)
or Calibration files are not covered under this warranty. Shipping and/or handling fees are the responsibility of
the vehicle owner unless the failure is determined to be a defect in materials and/or workmanship. The
correction or replacement of any defective part will be returned to the owner freight prepaid by common carrier.