user manual

14
What To Do Before Taking Your Vehicle In For Service
If you take your vehicle to a dealer or mechanic for service,
you must first restore the vehicle’s stock tuning. Hypertech
recommends you temporarily remove the Power Tuning Module,
even if the vehicle is restored to stock tuning. This assures the
Hypertech Power Tuning Module will not interfere with any
diagnostic procedures that may be performed during vehicle
servicing. The Hypertech Power Tuning Module for the 2003-
2004
6.0L Ford Power Stroke can be restored to stock tuning by
either
of two methods: (1) placing the Tuning Level Selector
switch in the “0” position or (2) removing the Power Tuning
Module. Once this service has been completed, you may re-
install the system by repeating the initial installation steps. If
you have any questions related to service issues, please call
Hypertech technical services at 901-385-1888.
PRODUCT WARRANTY
Warranty only applies to the original purchaser of a Hypertech
product. (Note: Warranty for the Hypertech Power Tuning
Module for 6.0L Ford Power Stroke will not apply, if used on
engines built prior to 9/29/03 and not updated to the B27.9
calibration.)
3/8” hole (main)
1/8” hole
Template for switch installation
as described on Page 14