user manual

6
8.See Figure D. The cable for the center connector lies in the
space between the battery and the power steering fluid
reservoir. Pull the connector and cable out from this space and
re-route it so that the connector is between the power steering
reservoir and the brake fluid reservoir.
III. Inspecting the Hypertech cable
9.The Hypertech
mounting bracket is
provided with the
in-line Power Tuning
Module and two (2)
mounting clips already
installed.
NOTE:
If these cables are
NOT already
connected as shown in
Figure E, identify
them and connect
them now.
10. Manual Transmission
applications ONLY.
See Figure F.
Remove the retaining
plugs holding the clutch
fluid reservoir to the
bracket on the power
steering fluid reservoir
and lay the reservoir
out of the way
, prior
to beginning this step.
Figure D
Center connector
from PCM
Power steering
reservoir
Brake fluid
reservoir
Figure E
C2 connector
C3 connector
Figure F
Retaining plugs
Clutch fluid
reservoir
Power steering
reservoir