Operation Manual

773
Maintenance
LIGHT BULBS
Use only the bulbs of the specified
wattage.
✽
NOTICE
After heavy, driving rain or washing,
headlight and taillight lenses could
appear frosty. This condition is caused by
the temperature difference between the
lamp inside and outside. This is similar to
the condensation on your windows inside
your vehicle during the rain and doesn’t
indicate a problem with your vehicle. If
the water leaks into the lamp bulb cir-
cuitry, we recommend that the vehicle be
checked by an authorized HYUNDAI
dealer.
Headlight, position light, turn sig-
nal light, front fog light bulb
replacement
(1) Front turn signal light
(2) Headlight (Low)
(3) Headlight (High)
(4) Position light
(5) Front fog light (if equipped)
WARNING - Working on
the lights
Prior to working on the light, firmly
apply the parking brake, ensure
that the ignition switch is turned to
the LOCK position and turn off the
lights to avoid sudden movement
of the vehicle and burning your fin-
gers or receiving an electric shock.
CAUTION
Be sure to replace the burned-out
bulb with one of the same wattage
rating. Otherwise, it may cause
damage to the fuse or electric
wiring system.
CAUTION
The headlight aiming adjustment
may be necessary after the head-
light assembly is reinstalled. If you
are unsure how to replace or aim
the headlight, we recommend that
you consult with an authorized
HYUNDAI dealer.
CAUTION
If you don’t have necessary tools,
the correct bulbs and the expertise,
we recommend that you consult
with an authorized HYUNDAI deal-
er. In many cases, it is difficult to
replace vehicle light bulbs because
other parts of the vehicle must be
removed before you can get to the
bulb. This is especially true if you
have to remove the headlight
assembly to get to the bulb(s).
Removing/installing the headlight
assembly can result in damage to
the vehicle.
OGD071026