Operation Manual

775
Maintenance
4. Pull out the both side of the front
bumper and then pull out the front
bumper.
5. Remove the headlight assembly from
the body of the vehicle. If you can reach
the bulb without removing the headlight
assembly, you do not need to do step 3
and 5.
6. Disconnect the power connector(s)
from the back of the headlight assem-
bly.
Headlight bulb (high)
Follow the steps 1 to 6 from the previous
page.
7. Remove the headlight bulb cover by
turning it counterclockwise.
8. Disconnect the headlight bulb socket-
connector.
9. Unsnap the headlight bulb retaining
wire by depressing the end and push-
ing it upward.
10. Remove the bulb from the headlight
assembly.
11. Install a new headlight bulb and snap
the headlight bulb retaining wire into
position by aligning the wire with the
groove on the bulb.
12. Connect the headlight bulb socket-
connector.
13. Install the headlight bulb cover by
turning it clockwise.
OGDE071052 OGD071044
H
H
i
i
g
g
h
h
L
L
o
o
w
w