Operation Manual

Maintenance
787
10. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
11. Reinstall the light assembly to the
body of the vehicle.
Front fog light (if equipped)
Follow the steps 1 to 6 from the previous
page.
7. Disconnect the power connector from
the socket.
8. Remove the bulb-socket from the
housing by turning the socket counter
clockwise until the tabs on the socket
align with the slots on the housing.
9. Install the new bulb-socket into the
housing by aligning the tabs on the
socket with the slots in the housing.
Push the socket into the housing and
turn the socket clockwise.
10. Connect the power connector to the
socket.
Side repeater light bulb replace-
ment (if equipped)
If the light bulb is not operating, we rec-
ommend that the vehicle be checked by
an authorized HYUNDAI dealer.
OGDE071055L OGD071030