Operation Manual

781
Maintenance
7. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
8. Install the service cover by putting it
into the service hole.
Back-up light (Bulb type)
4. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
5. Pull the bulb out of the socket.
6. Insert a new bulb into the socket.
7. Install the socket into the assembly by
aligning the tabs on the socket with the
slots on the assembly and turning the
socket clockwise.
8. Reinstall the light assembly to the
body of the vehicle
Stop/tail light and Stop light (LED type )
If the light does not operate, we recom-
mend that the system be checked by an
authorized HYUNDAI dealer.
Rear fog light (if equipped)
1. Remove the rear tire and wheel cover.
2. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
3. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
4. Insert a new bulb in the socket.
5. Reinstall the light assembly to the
body of the vehicle.
OGDE071062