User Manual

Dawn | 10www.iboxstyle.com
If problems occur when charging or if charging does not start:
• Remove your smartphone from its case if the thickness of the case exceeds
5mm or if it cotains metal.
• Check if your smartphone is placed on top of the i-box Dawn correctly as shown.
• The charging time varies depending on the charging capacity of the battery and
its current residual capacity.
• The components may heat up during the charging process. They will slowly cool
down again after the charging process.
USB charging port
1. Connect an external device via a USB cable to the USB charging port (9) on the
back of the i-box Dawn to charge the device.
2. The battery power of your device is shown via your devices display.
• There may be some radio interference while charging.
• Please charge your device using only one charging method at any one time.
• Please do not charge the same device using the wireless charging function and
USB charging port (9) at the same time.
Backup batteries
The i-box Dawn has a backup battery feature where 2x AAA batteries (not included)
will allow it to remember time and alarm settings if unplugged or power is cut.
Specifications
Power Input: 5V𝌂3.5A
USB Output: 5V𝌂1A
Speaker Output: 6 Watt RMS
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore
some of the instructions, specifications and pictures in this documentation may
differ slightly from your particular situation. All items described in this guide are for
illustration purposes only and may not apply to your particular situation. No legal
right or entitlements may be obtained from the description made in this manual.
Technical support
For further help, advice, information or live chat visit www.iboxstyle.com