- Baldwin Stereo Amplifier Owner's Manual

Introduction v

IMPORTANT PRELIMINARY NOTES

Observe these important preliminary notes before using your instrument.

AVOID PLACING DISKS NEAR MAGNETS - Do not place floppy disks on top of speakers, near mag-

nets, telephones or other sources of electromagnetic fields. The disk contents could be damaged.

UPDATEABLE OPERATING SYSTEM - two disks containing the operating system are supplied with

the instrument. The disks can contain a more recent version of the operating system than the one

contained in the instrument’s Flash ROM.

To load the operating system contained in the floppy disks:

(1) turn off the instrument, (2) insert OS-disk 1 in the drive, (3) turn on the instrument, (4) When the

message “Loading OS-DISK clears ALL MEMORY !! < Enter to load / Escape to abort >” appears, press

ENTER to start the OS update, (5) when the message, “INSERT NEXT OS-DISK please < Enter to load

>” appears, extract the first disk, insert OS-Disk 2 and press ENTER to continue (6) when the operation

is complete, the instrument sets to the default Style/Preset situation. After completing this process,

proceed with the reset that follows below to ensure proper operation. Remember to extract the second

disk and store both OS-disks in a safe place.

SYSTEM RESET

SYSTEM RESET - If the data contained in the instrument’s memory has been damaged, either by being

exposed to the effects of a strong magnetic field, or other unknown reason, the instrument may not

operate properly. The remedy is a System Reset:

(1) press and hold the UPPER 1 selector button located to the right of the LCD display, (2) simultane-

ously press the three buttons 2, 3 & 4 of the PROGRAMMABLE PADS section while still holding the

UPPER 1 selector button, (3) the message «System Reset» appears for an instant then the instrument

resets to the factory-set situation. All user-programmed data is irremediably lost.

UPPER 2

UPPER 1

LOWER

HOLD

PROGRAMMABLE PADS