Warranty
ATGElectronics,Inc.
107007
th
Street
RanchoCucamonga,CA91730
temperature or humidity that is higher than 35 degrees Celsius, (vi) has been subjected to a lightning strike,
power surge or overvoltage condition, (vii) has its LED Board subjected to static electricity due to failure to
discharge same prior to connecting or disconnecting the lead from the LED board, (viii) was not installed
and/or operated in accordance with ATG Electronics instructions and guidelines, (ix) has been mishandled,
misused, abused, tampered with, modified or altered by anyone other than ATG ELECTRONICS, (x) has been
subjected to abnormal stresses and operating conditions, or (xi) has been operated without overvoltage and
lightning protection devices in place.
Limitations
Disclaimers & Limitations of Liability
The foregoing warranty is exclusive of all other statutory, written or oral warranties and no other warranties of
any kind, statutory, by operation of law or course of performance, or otherwise, are given, herein expressed or
otherwise received. EXCEPT AS EXPRESSLY PROVIDED ABOVE, ATG ELECTRONICS DISCLAIMS
ALL REPRESENTATIONS, WARRANTIES AND CONDITIONS OF ANY KIND, EXPRESS OR
IMPLIED, REGARDING THE LED PRODUCTS AND ITS SERVICES, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR USE OR PURPOSE.
LIMITATION OF LIABILITY. Other than the obligation to repair or replace as provided above, ATG
Electronics shall have no liability for any losses, expenses or damages as a result of the installation, use,
inability to use, removal or replacement of any LED product. ATG Electronics will not under any
circumstances whether as a result of breach of contract, breach of warranty, tort, strict liability or otherwise be
liable for consequential, incidental, special or exemplary damages including but not limited to, loss of profits
or revenues, loss of any other goods or associated equipment or damage to any associated equipment, cost of
capital, cost of substitute products, facilities or services, down time cost or claims of claimant’s customers.
ATG Electronics liability on any claim of any kind for any loss or damages arising out of, resulting from or
concerning any LED product, any aspect of this warranty or for any products or services furnished hereunder
shall not exceed the price of the fixture which gives rise to the claim.
Return and Repair Procedures
All warranty requests and or questions are to be directed to ATG Electronics Customer Service Department
(CSD) at 877-461-5333. If deemed necessary, the CSD will issue a Returned Merchandise Authorization
(RMA) number which must be included on both the packing slip of the component or fixture being returned
and on the outside of the box. You must include your name and contact information, including your email
address, on the packing slip so that we can contact you easily. Each component or fixture must be packaged
very carefully and properly so as to prevent damages in shipment and must be shipped freight prepaid. Please
obtain a proof of delivery to ensure that the material is received.
Once the component or fixture has been received and tested, an evaluation report will be provided to the end
user via email. This report will clarify the following: