Datasheet

143 211 / 143 251
Technische Daten
Arbeitsweise: 1polig, Kontakt öffnet bei Erreichen der Temperatur
Nennstrom, Nennspannung (induktionsfreie
Belastung) Prüfklasse, Schalthäufigkeit:
AC 16 A 240 V II 100.000
AC 15 A 120 V II 100.000
Maximaltemperatur: T 80 °C
Max. zulässige Bimetalltemperatur: bei min. Pos. der Spindel,
je nach Bimetallqualität 70 °C bzw. 80 °C
Temperatureinstellbereich bzw. Schalttemperatur: 0 ... 70 °C
Toleranz: ± 3 ... 5K
Schaltdifferenz (statisch): 1 ... 4 K, je nach Einbau und Ausführung
Drehbereich: 143 211:
143 251:
300° <)
360° <)
Temperaturänderungsgeschwindigkeit: > 1 K/min
Aufbau: nach DIN EN 60 730-1 / VDE 0631
Schutzklasse: I
Kriechstromfestigkeit: PTI > 250
Prüfzeichen: siehe Approbationsliste (diese stellen wir Ihnen auf
Anforderung gern zur Verfügung)
Einstellspindel: Kunststoff Ø 6 mm, L2: 8 – 30 mm
Function: one pole, the contact opens when the temperature
is reached
Rated current, rated voltage (non inductive load),
testing class, number of switching operations:
AC 16 A 240 V II 100,000
AC 15 A 120 V II 100,000
Maximum temperature: T 80 °C
Max. permissible bimetal temperature: at minimum position of the adjusting spindle 70 °C
or 80 °C, depending on bimetal type
Temperature setting range or switch temperature: 0 ... 70 °C
Tolerance: ± 3 ... 5K
Switching differential (static): 1 ... 4 K, depending on mounting and design
Turning range: 143 211:
143 251:
300° <)
360° <)
Rate of temperature change: > 1 K/min
Design: according to DIN EN 60 730-1 / VDE 0631
Protection class: I
Proof tracking index: PTI > 250
Mark of conformity: refer to approval list (which is available upon request)
Adjusting spindle: plastic Ø 6 mm, L2: 8 – 30 mm
Fonctionnement: unipolaire, ouverture des contacts à la temp. calibrée
Courant nominal, tension nominale
(sans charge inductive), classe d’homologation,
nombre de cycle de coupures:
AC 16 A 240 V II 100.000
AC 15 A 120 V II 100.000
Température maximale: T 80 °C
Température maximale
admissible du bimétal:
l‘axe de réglage en position minimale en fonction
de la qualité du bimétal entre 70 °C et 80 °C
Plage de réglage ou température de coupure: 0 ... 70 °C
Tolérance: ± 3 ... 5K
Différentiel (mesure statique): 1 ... 4 K, en fonction du montage et de la version
Plage angulaire: 143 211:
143 251:
300° <)
360° <)
Vitesse de changement de température: > 1 K/min
Construction: d’après DIN EN 60 730-1 / VDE 0631
Classe de protection: I
Résistance au cheminement: PTI > 250
Marque de conformité: voir la liste d’homologations (disponible sur demande)
Axe de réglage: en plastique Ø 6 mm, L2: 8 – 30 mm
Technical Specifications
Caractéristiques
Die von uns genannten technischen Daten wurden von uns unter Labor-
bedingungen nach allgemein gültigen Prüfvorschriften, insbesondere
DIN EN-Vorschriften, ermittelt. Nur insoweit werden Eigenschaften zu-
gesichert. Die Prüfung der Eignung für den vom Auftraggeber vorgese-
henen Verwendungszweck bzw. den Einsatz unter Gebrauchsbedin-
gungen obliegt dem Auftraggeber; hierfür übernehmen wir keine
Gewährleistung. Änderungen vorbehalten.
All technical data has been determined under laboratory conditions in
accordance with the relevant test regulations, in particular DIN EN
Standards. The data is guaranteed in this respect only. It is the respon-
sibility of the customer to ensure suitability for the proposed application
or for operation according to conditions of use. We can offer no warran-
ty in this respect. Subject to change without notice.
Les données techniques que nous indiquons ont été déterminées dans
les conditions de laboratoire et suivant les prescriptions valables en gé-
néral, notamment les normes DIN EN. Les propriétés garanties ne le
sont que dans ce cadre. C‘est au client d‘examiner si ces instruments
conviennent à son utilisation prévue ou à l‘application selon les condi-
tions de leur mise en œuvre: En ce qui concerne ce point, nous n‘assu-
mons aucune garantie. Sous reserve de modification.