Product Overview
Application Assistance
800.365.5525
visit us at: www.icmcontrols.com
Phone
315.233.5266
Fax
315.233.5276
LIS69
ICM500
MULTI-MODE TIMERS
All features and specications subject to change without notice.
Specifications
Time Delay
• Type: Switch Settable
• Range: 1 to 1,023 seconds or minutes
(Multiples of 0.1, 1, 10, or 100)
• Repeat Accuracy: ±2% under xed conditions
• Fixed Time Tolerance: ± 5%
• Time Delay vs. Temperature and Voltage:
±5% maximum over the specied range of
input voltage and temperature
Input
• Nominal Voltage: 24, 115, 230 VAC
12, 24, 110 VDC
• Tolerance: ± 15% of nominal
• Frequency: 50/60 Hz
• Maximum allowable DC ripple voltage: 20%
peak to peak
• Power Consumption:
• During timing: 0.5 watts maximum
• After timing: 2.0 watts maximum
Output
• Type: Relay
• Form: SPDT, DPDT
• Rating:
• 10 amps resistive at 230 VAC
• 1/6 HP @ 115 VAC
• 1/3 HP @ 230 VAC
• Life: Mechanical 10,000,000;
• Full load: 1,000,000 operations
Protection
• Transient: ±1,400 volts for 100 µs
• Polarity: DC units are inverse voltage
protected
• Dielectric Breakdown: 1,500 volts
RMS minimum at 60 Hz between input
and output terminals
• Insulation Resistance: 100 megohms
minimum
Reset Time
• During and After Timing: 75 milliseconds
(May be reset during the timing period
without false output)
Mechanical:
• Mounting: Plug-in
• Termination: 8-pin (octal) standard or
11-pin plug-in
• Weight: 5 ounces (142 grams)
• Size: 3.5” x 2.4” x 1.8”
Environmental
• Operating Temperature: -40° C to +85° C
• Storage Temperature: -40° C to +85° C
Features
• Multi-mode, selectable time delay ranges
• Crystal timing accuracy
• Microprocessor controlled
• (4) single and (2) dual timing modes
- DOM, DOB, Interval, Single Shot,
- DOM/DOB and repeat cycle
• Bright LED’s indicate input and output
• 8-pin is for single pole, 11-pin is for double pole
• Switch-settable time delays:
- 1 to 1,023 seconds or minutes in multiples of
0.1, 1, 10, or 100
• 75 ms reset time during and after timing
- May be reset during the time delay period without
false output
• 8-pin base standard models
- Add suffix D for 11-pin models.
- Socket sold separately
• Adjustable from milliseconds to months
ICM500 ORDERING INFORMATION
ICM SERIES INPUT VOLTAGE OUTPUT TYPE DESCRIPTION
ICM500/500D 24 VAC
Single Pole
1 FORM C
8-pin
Operating Modes:
• DOM, DOB, interval, single shot, DOM/DOB and repeat cycle
Time Delays:
• Switch-settable delays from 1-1,023 seconds/minutes in
multiples of .1, 1, 10 and 100
ICM501/501D 115 VAC
ICM502/502D 230 VAC
ICM503/503D 12 VDC
ICM504 24 VDC
ICM505 110 VDC
Note: For 11-pin socket model, Double Pole, 2 FORM C, add sufx D. Example: ICM501D = 115 VAC, 11-pin
Socket to be ordered separately as an accessory item For 8-pin = ACS-8, For 11-pin = ACS-11
ACS-8, ACS-11
Relay Socket
The ICM500 series multi-mode timers can be set to
function as six separate timers (four single mode and two
dual mode). The four single mode timers include DOM,
DOB, interval, and single shot. The two dual mode timers
include DOM/DOB and repeat cycle.
Mode of Operation
Timing Functions
Delay on Make
Delay on Break
Interval
Single Shot
DOM/DOB
Repeat Cycle