Operation Manual

8
3
BASIC OPERATION
n Setting a frequency
D Using [Y]/[Z] keys
q Rotate [VOL] to turn power ON, then push [CLR] to se-
lect the frequency mode when memory CH number or
WX CH number appears on the function display.
w Push [Y]/[Z] to set the desired frequency.
- For IC-A14 only -
• 1 MHz tuning step is available with the IC-A14; push
[FUNC]
,
then push [Y]/[Z]. Push [FUNC] again to re-
turn the normal tuning.
D Using keypad (IC-A14 only)
q Rotate [VOL] to turn power ON, then push [CLR] to se-
lect the frequency mode when memory CH number or
WX CH number appears on the function display.
w Push 5 appropriate digit keys to input the frequency.
• Push [1] as the 1st digit.
• When a wrong digit is input, push [CLR] to clear, then repeat
step w again.
• Push [ENT] to enter consecutive zero digits.
• Only [2], [5], [7] and [0] can be entered as the 5th and final
digit.
[EXAMPLE]
• 111.225 MHz: Push
[1], [1], [1], [2], [2]
• 117.250 MHz: Push
[1], [1], [7], [2], [5]
• 120.000 MHz: Push
[1], [2], [ENT]
• 125.300 MHz: Push
[1], [2], [5], [3], [ENT]
2
3
[VOL]
[FUNC]
[Z]
[ENT]
[CLR]
[Y]
Keypad
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19