Operation Manual

n Duplex operation (Available with the IC-A14 only)
The duplex function allows you to call a flight service station
while receiving a VOR station. The duplex function requires
frequency programming for the flight service station in ad-
vance.
D Programming a duplex frequency
q Push [CLR] to select the frequency mode.
w Set a NAVI band frequency using [Y]/[Z] or keypad.
• NAVI band frequency range: 108.00–117.975 MHz
e Push [FUNC], then push [DUP-W](5).
• “DUP” blinks and transmit frequency appears.
r Set the desired flight service station frequency using
[Y]/[Z] or keypad, then push [ENT].
• The displayed frequency returns to the NAVI band frequency.
D Operating the duplex function
q Set the desired frequency in NAVI band.
• NAVI band frequency range: 108.00–117.975 MHz
w Push [FUNC], then push [DUP](6) to turn the duplex
function ON.
• “DUP” indicator appears.
e Push and hold [PTT] to transmit on the pre-programmed
transmit frequency.
r Release [PTT] to return to receive.
t Push [FUNC], then push [DUP](6) to cancel the function.
• “DUP” indicator disappears.
NOTE: A duplex frequency can be programmed into each
memory channel independently. Set a duplex frequency
before programming the memory channel, if desired. The
duplex ON/OFF setting can also be programmed into a
memory channel.
24
6
OTHER FUNCTIONS
“DUP” indicator blinks during
transmit frequency setting
[FUNC]
[DUP](6)
[DUP-W](5)
“DUP” appears during duplex
operation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19