Operation Manual

3
1
PANEL DESCRIPTION
D KEYPAD (Available with IC-A14 only)
 Inputs digit “1” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
 Inputs “1,” “Q,” or “Z” during memory name pro-
gramming. (p. 15)
 After pushing [FUNC], turns the ANL (Automatic
Noise Limiter) function ON and OFF. (p. 22)
 Inputs digit “2” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
 Inputs “2,” “A,” “B,” or “C” during memory name
programming. (p. 15)
 After pushing [FUNC], starts the scan. (pgs. 18,
19)
 Inputs digit “3” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
 Inputs “3,” “D,” “E,” or “F” during memory name
programming. (p. 15)
 After pushing [FUNC], selects memory bank
mode, during memory mode. (p. 12)
 Inputs digit “4” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
 Inputs “4,” “G,” “H,” or “I” during memory name
programming. (p. 15)
 After pushing [FUNC], turns the weather alert
function ON and OFF. (p. 23)
 Inputs digit “5” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
 Inputs “5,” “J,” “K,” or “L” during memory name
programming. (p. 15)
 After pushing [FUNC], enters duplex transmit
frequency programming condition, during NAVI
band operation. (p. 24)
 Inputs digit “6” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
 Inputs “6,” “M,” “N,” or “O” during memory name
programming. (p. 15)
 After pushing [FUNC], selects duplex operation
during NAVI band operation. (p. 24)
 Inputs digit “7” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
 Inputs “7,” “P,” “R,” or “S” during memory name
programming. (p. 15)
 After pushing [FUNC], selects weather channel
mode. (p. 23)
 Inputs digit “8” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
 Inputs “8,” “T,” “U,” or “V” during memory name
programming. (p. 15)
 After pushing [FUNC], key touch beep output ON
and OFF. (p. 22)