Operation Manual

4
IMPORTANT: If your model includes one sensor, follow the instructions below. If your model includes two
sensors, see page 5.
Install the iFit Sleep App and Pair the Sensor to the App
To use the iFit Sleep HR, you must have an iOS device (iPhone® 4s and later) or an Android device (Android
4.3 and later) that supports BLUETOOTH 4.0 wireless technology.
Visit the App Store℠ or the Google Play™ store, do a search for the free iFit Sleep app, and install the iFit Sleep
app on your device. Next, open the iFit Sleep app and touch Join to create an iFit account (or touch Log In to
log in to your existing iFit account). Then, follow the instructions in the iFit Sleep app to set up the sensor and to
pair and sync the sensor to the iFit Sleep app. Following is a summary of the procedure:
1. Plug the small end of the power cord fully into the power
port on the sensor.
2. Make sure that the power cord is plugged fully into the
power adapter. Then, plug the power adapter into an
appropriate outlet that is close to your bed. The green
indicator on the sensor will light.
3. Make sure that BLUETOOTH is enabled on your device.
Hold your device close to the sensor, and touch Set Sensor
in the iFit Sleep app. After several seconds, the sensor
will pair with the iFit Sleep app. The blue indicator on the
sensor will light.
Note: The sensor can track only one person.
4. See POSITION THE SENSOR on page 6.
Install The iFit Sleep App And Pair The Sensor To The App