Operation Manual

6
Follow the instructions below that apply to the number of sensors that you have.
Position One Sensor under Your Mattress
Follow all of the instructions on page 4. Next, orient the
sensor so the iFit logo is on top. Insert the sensor under
your mattress, and position it so it will be below your
chest when you are lying on your mattress (if you sleep
with another person, position the sensor so it will be under
the side of your chest that is away from the other person).
There must be a firm surface under the sensor. Then, turn
the sensor so the power port is facing the edge of your
bed closest to the outlet, and route the power cord toward
that edge of your bed. Make sure that the power cord
is not stretched and that it will not be stepped on or
tripped on.
Note: If you have an iFit Smart Mattress, insert the sensor
into one of the pockets on the underside of the mattress;
the sensor must be below your chest when you are lying
on the mattress. If desired, route the power cord through
the cord loops on the underside of the mattress.
Position Two Sensors under Your Mattress
Follow all of the instructions on page 5. Next, orient the
sensors so the iFit logos are on top. Insert the sensors
under your mattress, and position them as shown at the
right. There must be a firm surface under the sensors. Then, turn each sensor so the power port is facing the
closest edge of your bed, and route the power cord as shown at the right. Make sure that the power cord is not
stretched and that it will not be stepped on or tripped on.
Note: If you have an iFit Smart Mattress, insert the sensors into the two outer pockets on the underside of the
mattress. If desired, route the power cord through the cord loops on the underside of the mattress.
Position The Sensor
Two Sensors
One Sensor