User's Manual

Printed Documentation
5. Leave the room for at least 60 seconds. After 60 seconds without motion,
the walk test mode time expires. After the walk test is finished, the light on
the Motion sensor no longer activates when motion is detected.
Why doesnt the motion sensor detect when I leave the room and come
back?
The Motion Sensor has a built in four-minute delay. If after four minutes, it has not
detected motion, it changes from Occupied to Empty. If motion occurs during that four-
minute period, it remains in an Occupied state, as reported on the Summary Pages
Current States window. If motion occurs after the four-minute window, it changes from
Empty to Occupied as shown in the Current States window and a new alarm is generated
in the Alarm History window.
Will the Motion Sensor sense my pets?
The Motion Sensor cannot detect pets weighing less than 40 pounds. This also means that
it will not sense children weighing less than 40 pounds. However, in some cases, pets and
children will trip the Motion sensor if they walk very close to the sensor itself.
Why is there nothing in the picture that was taken as a result of the motion
detector being activated?
The Motion sensor has a 2 - 3 second delay before communicating with the iControl box.
The camera may miss the person walking through the cameras field of view. The remedy
is to reposition the camera and Motion sensor to account for this delay. For example,
point the camera along a corridor that takes a couple of seconds to traverse, and position
the motion sensor so that motion is detected as the person enters that corridor.
How far away can I install my iControl Motion sensor from the iControl
box?
100 feet.
Thermostat
What type of system will the iControl thermostat work with?
The iControl thermostat is an HAI single stage heating and cooling thermostat. It has 5-
wires, and requires 24 volts of AC power. Generally your existing thermostat should have
3 to 5 wires connected to it in order for our thermostat to be compatible.
The iControl thermostat is known to not work with