User's Manual

Your iControl Personal Web Portal Explained
The lower part of the Status window, labeled ‘Current States’, lists the current state of all
devices installed in your iControl System (e.g., the Front Hall Lamp Light is Off ).
However, certain devices will not be listed as they do not have states. In the current
Starter Kit, only cameras are such devices. Also, your location may have more iControl
devices installed than those showing in the Current States window. You can view these
devices by clicking on the up or down arrows or the small box inside the scroll bar on the
right of the Status window.
If a yellow triangle (
) displays next to the current state of a device, this device has
recognized a change that creates an alarm condition. In our example, the yellow triangle
next to ‘Front Door – Open’ indicates that the Door/Window sensor has recognized the
change from ‘Closed’ to ‘Open’.
The following table shows the possible states and the alarm conditions of iControl
devices.
Device
Possible
State(s)
Example
Generates a
yellow triangle
when:
Carbon Monoxide
detector
Ok or Alarm
‘Alarm’ indicates the
presence of carbon
monoxide.
Alarm
Door/Window sensor, Open or Closed ‘Open’ indicates the Open