User's Manual

Printed Documentation
2. Select the mode in which you wish to put your iControl System by clicking
on Home, Sleep, or Away. After choosing the mode, you will see a new
window appear indicating when the change will take effect.
To change the mode from your Keychain Remote:
1. Press and hold the ‘Lock’ or ‘Unlock’ button on your Keychain Remote.
You need to hold the button for one to two seconds until the LED flashes,
indicating the command was sent. The change will take effect in a few
moments. The range of the Keychain Remote is 100 feet, so you can use
it within 100 feet of your iControl box.
2. By pressing the ‘Lock’ button, you can change to Away mode, and by
pressing the ‘Unlock’ button you can change to Home mode, as shown in
the following image:
Note: For more information on how to change these default settings and use the other
buttons on your Keychain Remote, see Your Keychain Remote
.