User's Manual

Managing Your iControl Devices
x Place it in an area likely to get cold before any other area in the building,
to ensure early warning.
x Mount it on an interior wall where there is free air movement and not on an
outside wall or near a basement floor.
x Do not place the sensor in the same room as a furnace, water heater, or
any other heat source that may stay warm after the heating fails.
x Keep away from areas with extensive metal or electrical wiring that may
prevent sensor signals from reaching your iControl box and areas where it
may be exposed to moisture.
Once the sensor is added to your System and installed, the iControl box will discover it
within about 70 minutes. As soon as your System ‘sees’ your Freeze sensor, the yellow
dot adjacent to its name on your System page will turn green, indicating that your sensor
is activated. If you want to activate the sensor more quickly, apply ice to it so that its
temperature drops to 41°. Note that it will take some time for the sensor to cool to 41°
(even with direct contact with ice).
Your Keychain Remote
Your Keychain Remote
Your iControl Keychain Remote is a useful tool that allows you to control various device
actions, such as turning on lights, changing the System mode from Away to Home as you
approach the house, or changing the System mode from Home to Away as you drive off
to work.