User's Manual

Managing Your iControl Devices
3. Be sure that the Z-Wave Lamp Module has not been associated with
another iControl System. Once installed, Z-Wave modules can't be moved
between systems.
Physical Installation of Your Lamp Module
Next, physically install your Lamp module. Lamp modules are suited to controlling only
indoor lamps and light fixtures using between 40- and 300-watt incandescent light bulbs.
They do not operate properly with fluorescent light bulbs. To install your Lamp module,
follow these steps:
1. Choose the light you wish to control (one light per module).
2. Plug in the Lamp module.
3. Plug the power cord from the light into the Lamp module (as shown).
Note: To operate properly, a Lamp module needs to be placed with the following
considerations in mind: