User's Manual

Printed Documentation
x Install it within 100 feet of the iControl box.
x Powerline Lamp modules DO NOT work if plugged into power strips
equipped with a surge protector or uninterruptible power supplies.
x If a wall switch controls the power outlet, the wall switch must be turned on
and left in the On position.
x The Lamp module is not recommended for 3-way lights or lights controlled
by 3-way wall switches.
Setting the Brightness of Lighting
You can set the brightness of your lighting, using the Lamp module as a dimmer. To do
so, follow these steps:
1. From your iControl Summary page, either click on the current level of the
Lamp module you want to set in the Current States area of the Status
window or select the Lamp module you want to adjust from the
QuikControl menu. This will bring up the QuikControl menu for that Lamp
module.