Spec Sheet

Electrical
Keyboard: Low Power CMOS power supplied by the host computer.
RS-232: 5VDC/70mA (power adapter regulated 5VDC/350mA or equivalent).
Environmental
Operating Temperature: 32F° to 131°F (0°C to 55°C).
Storage Temperature: -22° F to 158°F (-30°C to 70°C).
Humidity: Maximum 95% non-condensing.
Reliability
Electronics MTBF: Read and Interface electronics, RS-232/keyboard: 125,000 POH.
Magnetic Head Life: 1,000,000 passes minimum.
Rail and Cover Life: 1,000,000 passes minimum.
Read Rate: Less than one error in 100,000 bits on cards conforming to ISO 7811 1-5 (not induced by
operator error).
Warranty: One year, parts and labor.
Mechanical
Magnetic Stripe Formats: ISO 7811, AAMVA, and CA DMV.
Swipe Speed: 3 to 55 inches per second, bi-directional.
Card Width: .01 to .055 inches.
Slot Width: Maximum card thickness: .055 (1.37mm).
Interfaces: TTL (undecoded magnetics), RS-232, Keyboard wedge, USB/keyboard.
Dimensions: Length: 5.22 inches (133mm). Width: 1.25 inches (32mm). Height: 1.6 inches (41mm).
Weight: Approximately 8 oz. (with cabling).
Cable Length: 5-foot straight cable.
Connector: Keyboard: 5- pin DIN connector (AT/XT).*
6-pin mini-DIN connector (PS/2).*
ADB adapter cable required (Mac).
RS-232: 9-pin D-sub female.
Mounting Options: Rubber feet (stand-alone operation).
Velcro pads (keyboard mounting).
Two mounting holes (permanent mounting).
EasyMag
Swipe Reader
Footprint:
WCR3321/31XXQ EasyMag Intelligent Swipe Reader Specifications
1047 S. Placentia Avenue
Fullerton, California 92831
[phone] Fax: [phone]
Visit us at www.idt-net.com
TM
*All units come with adapter for AT/XT or PS/2
80003503-002 ©2002 ID TECH, Inc. ID TECH, Value through Innovation, and EasyMag are trademarks of ID TECH, Inc. #134 R2/02 2.5M
All specifications subject to change without notice.