User's Manual

ViVOpay Kiosk III User Manual

Page 14 of 19

2.6 Connecting to the Data Port

The Kiosk III has two data connections options: USB through the USB connector and RS-232

through the 14-pin Molex connector.

The USB port uses a standard USB connector and pinouts. The RS-232 port has the following

pinouts.

Pin Description Pin Description

1 Power ground 2 +7.5v to 45VDC

3 Power ground 4 +7.5v to 45VDC

5 No connection 6 Reserved

7 Reserved 8 Reserved

9 Signal ground 10 Signal ground

11 RS-232 Tx 12 RS-232 Rx

13 No connection 14 Reserved

To build your own RS-232 cable, use Molex female connector part number 0511101451 with 50394-

series crimps (see www.molex.com

for more information). Pin 1 is indicated by a triangle (diagram is

socket-side view of female connector). If you are powering the Kiosk III from this connector, wire the

two power pins (pins 2 and 4) together and the two power ground pins together (pins 1 and 3).

USB Port

232

Port