User's Manual
ViVOpay Kiosk III User Manual
Page 5 of 19
1 Overview
The ViVOpay Kiosk III is a compact stand-alone contactless reader designed to support
contactless transactions based on ISO 18092, ISO 14443 Type A/Type B/MiFare compatible cards,
fobs and tags as well as NFC phones. The ViVOpay Kiosk III is comprised of a compact controller
module and an antenna module packaged individually. This two-part design allows the controller
module to be installed within the cabinetry of a kiosk and the antenna installed on an exterior
surface with a separation of up to 1 meter. The antenna is available with a square or angled bezel.
The ViVOpay Kiosk III supports USB and serial RS-232 host communication using the protocol
defined in the Global Reader Serial Interface Developers Guide. The ViVOpay Kiosk III is
designed to support a wide input power range. Both data and power can be supplied via a single
cable to reducing the effort and complexity of installation.
1.1 Features
• Supports ISO 14443 Type A, Type B, and optional Type C (Felica)
• Supports ISO 18092 with protocol stacks to support Peer-to-Peer, Card Emulation and
Reader/Writer modes
• NFC based contactless transactions
• 32-bit Microcontroller with ample memory capable of supporting
future application upgrades
• Crypto data processing for contactless EMV cards
• RS-232 (9600, 19200, 38,400, 57,600, 115,200 baud) host interface
• RS-232 or USB data communications
• Small antenna flush-mounted on external cabinetry with square or
angled bezel
• Internal mounted controller board with 1 meter controller/antenna separation
1.2 Valid Payment Applications
ViVOpay Kiosk III supports the following contactless payment applications in the latest release of
firmware:
• ISO 14443
• ISP 18092
• PayPass M/Stripe
• PayPass M/Chip
• Visa VCPS (MSD and qVSDC) IRWIN listed
• American Express – ExpressPay
• Discover DPAS
• Interac
• PBOC
• Isis SmartTap
• ViVOcard 1, 2, and 3
• Mifare: Classic, Ultralight C, DESFire, DESFire EV1