Full Product Manual

www.idealind.com
7
Circuit Breaker Lockout System
• Covers most 120V - 277V
breakers!
• Works on wide range of
breakers, including single-
and multi-pole configurations
• Makes use of unique lock
rail system, providing the
following benefits:
- Allows panel door to be
closed even when lockouts
are in place
- Accommodates multiple
locks, facilitating group
lockout activity without
hasps
- Keeps weight off the
breakers, protecting
delicate electrical
components from damage
- Positions locks and tags
outside the panel, making
sure lockout activity is
clearly visible to anyone in
the area
3. Pass plastic key through
lock rail and attach lock,
preventing key from
sliding down cable and
opening lockout device.
4. For group lockouts, run
key through multiple
loops in lock rail and
apply locks. No hasps
required!
1. Peel liner off bottom of
the lock rail, exposing
super-bond adhesive.
Permanently affix to any
location on the panel. No
drilling required.
2. Attach the lockout
device to the breaker
and snap into locked
position.
How the System Works
• Lockout devices constructed
of high-impact Isoplast
polymers
• Cables are 2 ft. in length
• Lock rails made of durable
isoplast polymers with
acrylic adhesive backing
Technical Information
Clamp-on
5. Lockout device is
unlocked by inserting
and turning the red
plastic key.
For use on Square D NQO and other
breakers that have a hole in the switch
tongue. Just align pins with hole and
snap closed. Pins prevent switch from
being thrown.
Snap-on
Perfect when locking out
adjacent breaker lockouts.
For use on breakers that do not have
a hole in the switch tongue, including
multiple breakers with tie bars. Turn
thumb-screw to clamp lockout securely
onto switch, then snap the cover closed
to prevent thumbwheel from being
loosened.
Description
Outer Dimensions (In.) Switch Clearance (In.)
A B C D E
Snap-on 0.90 1.88 0.74 0.40 0.35
Clamp-on 0.95 2.56 0.74 0.35 0.42
Description Qty. Cat. No.
Snap-on lockout for Square D NQO and other
breakers with a hole in the switch tongue
1 44-768
Clamp-on lockout for breakers without hole in the switch
tongue, including multi-pole breakers with tie bars
1 44-764
4 in. Lock Rail with seven lock loops 1
44-769
Please see breaker guide for your application (pg. 12)