Emergency Stop Switches ø16 ø22 X6 (Unibody) XA (Unibody) XW HW YW Third-generation emergency stop switch with Reverse Energy Structure. Smallest in its class. Small, unibody emergency stop switches suitable for equipment with small mounting space. 22mm, 4-contact emergency stop switch. Unique safety mechanism. 22mm emergency stop switches. D-007 D-015 D-026 with removable contact block XW (Mechanical Indicator) The industry’s first 16mm, 4-contact emergency stop switch.
ø30 SEMI Stop Switches XN EU2B SEMI Stop Switches 30mm, 4-contact emergency stop switch. Padlockable and flush bezel are available. Hazardous location Switches SEMI Emergency OFF (EMO) Switches Wide variety with yellow button, white guard and nameplate D-051 D-065 D-069 Compare and select the right product for you. Solutions with IDEC products Selection Guide Industry Solutions Safety Solutions D-076 D-005 P.23 P.43 P.33 P.47 P.35 www.apem-idec.
Emergency Stop Switches Selection Guide Long Commited to providing the Thirdgeneration Safety IDEC’s original “Safe Break Action” and “Reverse Energy Structure”ensure the safety of operator and system, when the switch is damaged due to excessive shocks. Third Generation Compliant with international safety standards. Even more consideration has been taken into account on operator safety.
Emergency Stop Switches Selection Guide Highest Level of Safety Third Generation Emergency Stop Switches IDEC’s Unique Safety Technology ———————————————————————————————— Reverse Energy Structure Safe Break Action With X series emergency stop switches, the potential energy level of the latched status is lower than that of normal status. In the event the switch is damaged due to excessive shocks, the NC contacts will turn off, thus stopping the machine (patented design).
Emergency Stop Switches Selection Guide Model New Concept Reverse Energy Structure Safe Break Action ø16m Mount Hole Non illuminated ø29mm Button Detachable Contact Block Pushlock Pull or Turn Reset Mark XA1E-BV3 (Solder, PC Board Terminal) XA1E-BV4 (Solder, PC Board Terminal) ø40mm Button AB6E-3BV (Solder Terminal) ø29mm Button Unibody (no safe break action) Pushlock Pull or Turn Reset ø29mm Button Illuminated Detachable Contact Block Pushlock Pull or Turn Reset ø40mm Button ø38mm Button ø22mm
Emergency Stop Switches Selection Guide (Continued from previous page) Model Mark XW1E-TV4 (Screw Terminal) Push-ON Detachable Contact Block Pushlock Pull or Turn Reset ø40mm Button Plastic Bezel New Concept Reverse Energy Structure Safe Break Action ø30mm Mount Hole Non illuminated ø40mm Button Detachable Contact Block Flush Bezel Pushlock Pull or Turn Reset ø44mm Button Detachable Contact Block Pushlock Pull or Turn Reset Detachable Contact Block Pushlock Pull or Turn Reset ø40mm Button
Emergency Stop Switches X6 Series Excellent safety and design. The shortest depth behind the panel in its class. • See website for details on approvals and standards. D-007 www.apem-idec.
Excellent safety Third-generation Reverse Energy Structure Emergency Stop Switches ø16 X6 Series Emergency Stop Switches (Unibody) Unparalleled design IDEC’s unique Reverse Energy Structure, achieved as a result of in-depth failure analysis of emergency stop switches, has resulted in this innovative emergency stop switch.
Emergency Stop Switches ø16 X6 Series Emergency Stop Switches (Unibody) Third-generation emergency stop switch with Reverse Energy Structure Smallest in its class APEM Switches & Pilot Lights Control Boxes • Two button sizes—ø30mm and ø40mm • Two ways of resetting —pulling and turning. • Safety lock mechanism (IEC 60947-5-5; 6.2) • Direct opening action (IEC 60947-5-5; 5.
Emergency Stop Switches ø16 X6 Series Emergency Stop Switches (Unibody) Pushlock Pull/Turn Reset Switch (Solder Terminal) Unmarked Pushlock Pull/Turn Reset Switch Shape Package quantity: 1 Main Contact (NC) Part No.
Emergency Stop Switches ø16 X6 Series Emergency Stop Switches (Unibody) Dimensions Panel thickness 0.8 to 4.5 +0 .2 0 +0.2 0 0.5 9.2 .2 +0.2 0 17.9 0.5 9.2 1.7 ø16 APEM Switches & Pilot Lights Control Boxes 3.6 Solder/tab terminal #110 (Depth behind the panel: 23.9 mm) Anti-rotation projection 15.9 20.6 Mounting Hole Layout Solder terminal (Depth behind the panel: 19.5 mm) 0 0. ø3 0 0. ø3 8 5. ø1 Emergency Stop Switches Enabling Switches 8.
Emergency Stop Switches ø16 X6 Series Emergency Stop Switches (Unibody) Safety Precautions • Turn off power to the X6 series units before installation, removal, wiring, maintenance, and inspection. Failure to turn power off may cause electrical shocks or fire hazard. • For wiring, use wires of proper size to meet the voltage and current requirements and solder properly. Improper soldering may cause overheating and create fire hazards.
Emergency Stop Switches X Series High level of safety with Safe Break Action and Reverse Energy Structure. • See website for details on approvals and standards. Series Type Features Unibody Small, unibody emergency stop switches. Only 19.5mm behind panel. With Removable Contact ø16 mm, 4-contact Emergency Stop Switch. Round form types also available. Standard Bezel Four different terminal styles. Can be used on FB series control stations.
Emergency Stop Switches Saves space XA Series XW Series XN Series Metal Bezel 19.5mm 48.7mm 27.9mm 21mm 47.7mm APEM Switches & Pilot Lights Unibody w/ Removable Contact w/ Removable Contact (Round form) Standard Bezel Mechanical Indicator Plastic Bezel Flush Bezel Padlockable ø16 XA Control Boxes (w/ removable contact block) Prevents dust build-up Emergency Stop Switches Enabling Switches Safety Products The round form button design is ideal for use on consumer equipment.
Emergency Stop Switches ø16 XA Series Emergency Stop Switches (Unibody) Small, unibody emergency stop switches suitable for equipment with small mounting space. Requires only ø16mm × 19.5mm for installation. APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches • ø29mm and ø40mm mushroom operators • Degree of protection IP65 and IP40 (IEC 60529) • Dark red (Munsell 5R4/12) and bright red (Munsell 7.5R4.5/14) colors for operators of emergency stop switches.
Emergency Stop Switches ø16 XA Series Emergency Stop Switches (Unibody) Pushlock Pull/Turn Reset (Solder Terminal) XA Series Shape Part No.
Emergency Stop Switches ø16 XA Series Emergency Stop Switches (w/Removable Contact Block) Compact size - only 27.9 mm deep behind the panel. Reliable “Safe break action.” APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products Explosion Proof Terminal Blocks • The depth behind the panel is only 27.9 mm for 1 to 4 contacts, both on illuminated and non-illuminated.
Emergency Stop Switches ø16 XA Series Emergency Stop Switches (w/Removable Contact Block) Pushlock Pull/Turn Reset (Solder Terminal/PC Board Terminal) Non-illuminated Shape ø29mm Mushroom ø40mm Mushroom NC Main Contact NO Monitor Contact Part No.
Emergency Stop Switches ø16 XA Series Emergency Stop Switches (w/Removable Contact Block) Dimensions Non-illuminated 27.2 19.8 8.7 Mounting Panel Thickness: 0.8 to 3.7 APEM Switches & Pilot Lights ø2 9.8 Control Boxes 0 ø4 9 ø2 30.4 Emergency Stop Switches Enabling Switches Terminal Cover XA9Z-VL2 Safety Products 29.4 2.1 3.1 Explosion Proof Terminal Blocks Rubber Gasket Locking Ring 25.8 25.8 20.6 ø29mm Mushroom 30.4 PC Board Terminal 30.4 20.
Emergency Stop Switches ø16 XA Series Emergency Stop Switches (w/Removable Contact Block) Terminal Arrangement (Bottom View) Non-illuminated With NO monitor contacts (blue) NC main contacts (black): Terminals 1-2 NO monitor contacts (blue): Terminals 3-4 NC main contacts (black) only NC main contacts (black): Terminals 1-2 TOP 1 2 2 Left 2 3 1 4 1NC: Terminals on right 2NC: Terminals on right and left 3NC: Terminals on right, left, and top APEM Right 1 Right Right 4 2 1 1 1 2 1 2 Left 1
Emergency Stop Switches ø16 XA Series Emergency Stop Switches Round Form (w/Removable Contact Blocks) Smooth Round Form Buttons APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products • IDEC's unique Reverse Energy Structure • Depth behind the panel: 27.9mm • Arrow marked and unmarked buttons. • The smooth button is ideal for applications that require utmost cleanliness.Prevents dust built-up, and is also easy to clean.
Emergency Stop Switches ø16 XA Series Emergency Stop Switches Round Form (w/Removable Contact Blocks) Pushlock Pull/Turn Reset (Solder Terminal) Non-illuminated Part No. (Ordering Part No.
Emergency Stop Switches ø16 XA Series Emergency Stop Switches Round Form (w/Removable Contact Blocks) Dimensions Mounting Panel Thickness 0.5 to 3.7 Panel Cut-out ø4 0 ø3 0 +0.2 27.2 19.8 8.7 1.7 0 ø16 .2 +0.2 ø2 9. 8 Unmarked Rubber Washer Locking Ring Terminal Cover XA9Z-VL2 +0.2 17.9 0 APEM Switches & Pilot Lights 0 Unmarked ø4 0 ø3 0 27.2 19.8 8.7 Emergency Stop Switches Enabling Switches 30.4 Control Boxes 2.1 29.4 Safety Products 25.8 30.4 20.6 25.8 30.4 2.
Emergency Stop Switches ø16 XA Series Emergency Stop Switches Safety Precautions • Turn off power to the XA series emergency stop switch before starting installation, removal, wiring, maintenance, and inspection of the relays. Failure to turn power off may cause electrical shock or fire hazard. • Use the LED unit removal tool when replacing the LED unit to avoid burn on your hands. • Use wires of the proper size to meet the voltage and current requirements, and solder the wires correctly.
Installing the LED Unit (with Removable Contact Block) Align the to of the LED unit with the TOP marking on the contact block. Push the LED unit into the contact block. APEM Switches & Pilot Lights Explosion Proof Terminal Blocks Relays & Sockets Circuit Protectors Power Supplies LED Illumination Controllers Operator Interfaces Sensors AUTO-ID 19.8 8.7 (0.5) Solder/Tab Terminal #110 1. Use #110 receptacles for 0.5mm-thick tabs. 2.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches ø22 mm, 4-contact Emergency Stop Switch. Compact size—only 37.1 mm deep behind the panel (screw terminal style 48.7 mm with terminal cover). Reliable “Safe break action.” • The depth behind the panel is only 37.1 mm for 1 to 4 contacts (screw terminal style 48.7 mm with terminal cover). • The same depth behind the panel for illuminated and non-illuminated switches.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches XW Series Emergency Stop Switches Non-illuminated Pushlock Pull / Turn Reset (Screw Terminal) Shape ø40mm Mushroom APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches ø60mm Mushroom Safety Products Explosion Proof Terminal Blocks Relays & Sockets Circuit Protectors Power Supplies LED Illumination Controllers Operator Interfaces Sensors IP20 w/Terminal Cover 1NC 2NC — — XW1E-BV401MF➀ XW1E-BV402MF➀ 3NC 4NC
Emergency Stop Switches ø22 XW Series Emergency Stop Switches XW Series Emergency Stop Switches LED Illuminated Pushlock Pull/Turn Reset (Screw Terminal) Shape Illumination NC Main Contact NO Monitor Contact IP20 w/Terminal Cover 24V AC/DC 1NC 2NC 3NC 4NC 1NC 2NC 3NC 2NC — — — — 1NO 1NO 1NO 2NO XW1E-LV401Q4MFR XW1E-LV402Q4MFR XW1E-LV403Q4MFR XW1E-LV404Q4MFR XW1E-LV411Q4MFR XW1E-LV412Q4MFR XW1E-LV413Q4MFR XW1E-LV422Q4MFR XW1E-LV401Q4MR XW1E-LV402Q4MR XW1E-LV403Q4MR XW1E-LV404Q4MR XW1E-LV411Q4MR XW
Emergency Stop Switches ø22 XW Series Emergency Stop Switches Dimensions (Non-Illuminated) Screw Terminal (IP20) Panel Thickness 0.8 to 6 R0. 8m ax. ø22 .3 +0. 4 3.2 +0.2 0 24.1 R +0.4 0 0 APEM Switches & Pilot Lights Panel Cut-out 18.5 Gasket Locking Ring 20.1 0.5 37 Emergency Stop Switches Enabling Switches ø6 0 M3 Terminal Screw ø40 Control Boxes Safety Products Explosion Proof 48.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches Dimensions (Illuminated) Screw Terminal (IP20) LED Illuminated Screw Terminal (w/terminal cover) LED Illuminated ø40mm Operator ø40mm Operator Panel Thickness 0.8 to 6 20.1 R0. Panel Thickness 0.8 to 6 8m ø22 ax. .3 3.2 +0.2 0 APEM +0 . 0 4 Switches & Pilot Lights R 24.1 R +0.4 0 18.5 Control Boxes Panel Cut-out LED Push-ON 18.5 M3 Terminal Screw 20.1 Gasket Locking Ring M3 Terminal Screw 0.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches Mounting Hole Layout LED Internal Circuit +0.4 0 ø22.3 Screw Terminal Solder/PC Board Terminal Connector Style Y LED X2 • The values shown above are the minimum dimensions for mounting with other ø22mm pushbuttons. For other control units of different sizes and styles, determine the values according to the dimensions, operation, and wiring convenience.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches (Mechanical Indicator) High level of safety with Safe Break Action. Mechanical indicator on the operator body shows the contact status - green when NC contacts are closed - reducing the maintenance work. • IDEC’s original “Safe Break Action” and “Reverse Energy Structure” ensure the safety of operator and system, when the switch is damaged due to excessive shocks.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches (Mechanical Indicator) ø22 XW Series Emergency Stop Switches (Mechanical Indicator) Non-illuminated Pushlock Pull/Turn Reset (Screw Terminal) Shape ø38 mushroom with mechanical indicator APEM NC Main Contact Package quantity: 1 Part No.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches (Mechanical Indicator) Dimensions Screw Terminal (IP20) Screw Terminal (w/terminal cover) Illuminated R0. 2.8 ø22 8m 3.2 +0.2 0 18.5 20.1 R0. 8m ax. ø22 .3 +0. 4 2.8 +0 . 0 4 3.2 24.1 24.1 Panel Cut-out 44.9 46.4 Non-Illuminated 18.5 18.5 Control Boxes 34.3 M3 Terminal Screw Gasket Non-Illuminated 20.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches Safety Precautions • Turn off power to the XW series emergency stop switch before starting installation, removal, wiring, maintenance, and inspection of the relays. Failure to turn power off may cause electrical shock or fire hazard. • For wiring, use wires of the proper size to meet the voltage and current requirements. Tighten the M3 terminal screw to a tightening torque of 0.6 to 1.0 N·m.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches Instructions About PC Board and Circuit Design 1. Use PC boards made of glass epoxy copper-clad laminated sheets of 1.6 mm in thickness, with double-sided through hole. 2. PC boards and circuits must withstand rated voltage and current, including the instantaneous current and voltage at switching. 3. The minimum applicable load is 5V AC/DC, 1 mA. This value may vary according to the operating environment and load. 4. Within the 2.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches Instructions APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products Explosion Proof Terminal Blocks Contact Bounce Nameplate or Switch Guard When the button is reset by pulling or turning, the NC main contacts will bounce. When pressing the button, the NO monitor contacts will bounce. When designing a control circuit, take the contact bounce time into consideration (reference value: 20 ms).
ø22 HW Series Emergency Stop Switches Emergency Stop Switches (w/Removable Contact Block) Specifications Standards Applicable Standards Specifications Mark Operating Temperature Storage Temperature Operating Humidity Operating Force Minimum Force Required for Direct Opening Action Maximum Operator Stroke Contact Resistance Insulation Resistance File No. or Organization UL508 UL Listing File No. E68961 CSA C22.2 No. 14 File No. LR92374 TÜV Rheinland EN60947-5-5 EU Low Voltage Directive GB14048.
HW HW Series Emergency Stop Switches ø22 Pushlock Key Reset Switches (with Removable Contact Block) Shape ø40mm Mushroom Pushlock Key Reset HW1B-X4 Contact Part No. 1NC HW1B-X401R 1NO-1NC HW1B-X411R 2NC HW1B-X402R 2NO-2NC HW1B-X422R Button Color Red only • • • • • When pressed, the button is held depressed. The button is released by turning the key clockwise. Pushlock key reset switches with one or three contact blocks contain a dummy block.
ø22 HW Series Emergency Stop Switches Dimensions ø29mm Pushlock Turn Reset HW1B-V3 Gasket Locking Ring Safety Lever Lock Panel Thickness 0.8 to 6 LO Terminal Screw M3.5 ø29 41.4 26.5 25 CK 49.4 (1 or 2 blocks) 1 contact block 2 contact blocks 4 contact blocks 29.4 13 69.4 (4 blocks) 32 All dimensions in mm. ø40mm Pushlock Turn Reset HW1B-V4 ø60mm Pushlock Turn Reset HW1B-V5 Safety Lever Lock Safety Lever Lock LO 13 ø60 ø40 41.4 26.5 25 CK 29.4 32 15 34.
HW HW Series Emergency Stop Switches ø22 Accessories Material Part No. Package Quantity Locking Ring Wrench Metal (weight: approx. 150g) Description & Dimensions (mm) • Used to tighten the locking ring when installing the HW switch onto a panel. • Tighten the locking ring to a torque of 2.0 N·m. MW9Z-T1 1 Lamp Holder Tool 8 ø2 110 Rubber OR-55 1 Rubber Mounting Hole Plug ø14 • Used to install and remove the LED lamps. ø11.6 Shape 59 • Used to plug the unused ø22.2mm mounting holes.
ø22 HW Series Emergency Stop Switches Maintenance Parts Shape Material Package Quantity Part No.
HW HW Series Emergency Stop Switches ø22 Safety Precautions • Turn off the power to the HW series control units before starting installation, removal, wiring, maintenance, and inspection of the products. Failure to turn power off may cause electrical shocks or fire hazard. • To avoid a burn on your hand, use the lamp holder tool when replacing lamps. • For wiring, use wires of a proper size to meet the voltage and current requirements. Tighten the M3.5 terminal screws to a tightening torque of 1.0 to 1.
ø22 YW Series Emergency Stop Switches Emergency Stop Switches Specifications Specifications Standards Applicable Standards Operating temperature –20 to +55°C (no freezing) UL/c-UL Listed File No.
YW YW Series Emergency Stop Switches ø22 Pushlock Pull/Turn Reset Style ø40mm Mushroom Contact Part No. Button Color Code 1NC YW1B-V4E01R 2NC YW1B-V4E02R 3NC YW1B-V4E03R 1NO-1NC YW1B-V4E11R 1NO-2NC YW1B-V4E12R 2NO-1NC YW1B-V4E21R Red only Dimensions Panel Thickness 0.8 to 6 10 10 10 Note: When pressed, the button is locked in the depressed position, and is reset when either pulled or turned clockwise. M3.5 Terminal Screw Contact Block Locking Ring 41.4 28.6 Gasket 0 ø4 45.8 32.
ø22 YW Series Emergency Stop Switches Accessories Lamp Holder Tool OR-55 Rubber Mounting Hole Plug 8 ø2 1 Made of rubber. Used for replacing lamps. Used for plugging unused mounting holes in the panel. Color: Black ø29 LW9Z-BM Used for plugging unused mounting holes in the panel. Weight: Approx. 18g ø25.8 1 Locking Ring Anti-Rotation Ring HW9Z- RL Padlock Cover Prevents rotation of switches in panel. Mainly used with selector switches when no nameplate is used. With waterproof gasket (IP65).
YW YW Series Emergency Stop Switches ø22 Maintenance Parts 6V AC/DC LSED-1R 12V AC/DC LSED-2R 24V AC/DC Base BA9S/14 ø10.6 LSED-6R LSED-HR 110/120V AC/DC LSED-M3R 230/240V AC/DC LS-T6P 6.3V, 1W LS-T8P 18V, 1W LS-T3P 30V, 1W YW-E10P Color: blue Contact: 1NO YW-E01P Color: reddish purple Contact: 1NC Single Contact Block 1 20.8 One pack contains 100 incandescent lamps.
ø22 YW Series Emergency Stop Switches Din Rail Mount Transformer Dimensions (mm) Secondary Terminal Screws M3.5 22 30 Primary Terminal Screws M3.5 . 110V AC 115V AC 120V AC 220V AC 230V AC 240V AC 380V AC 440V AC 480V AC Part No. TWR516 TWR5116 TWR5126 TWR526 TWR5236 TWR5246 TWR5386 TWR546 TWR5486 Applicable Lamp Rating 2-ø3.5 Mounting Holes One full voltage illuminated unit containing LED lamp LSED-6 (6V AC/DC) or incandescent lamp LST6 (6.
YW YW Series Emergency Stop Switches ø22 Instructions Panel Mounting • Remove the contact block from the operator. Remove the locking ring from the operator. Insert the operator into the panel cut-out from the front, tighten the locking ring from the back, then install the contact block to the operator. Removing Contact Blocks and Full Voltage Adapter Insert a flat screwdriver between the latch and contact block mount ing adapter, and disengage the latch. k j l j Pull up the locking lever.
ø22 YW Series Emergency Stop Switches Instructions Tightening Torque for Terminal Screws Tighten terminal screws to a torque between 1.0 and 1.3 N·m. Anti-rotation Ring and Mounting Panel Turn the TOP marking on the operator and the mark on the antirotation ring to the recess on the mounting panel. Projections (▲ mark) Anti-rotation Ring Locking Ring Panel Thickness 1.2 to 4.5 mm DC Power 1. Switching power supply Regulated voltage from switching power supply is best suited.
Emergency Stop Switches ø30 XN Series Emergency Stop Switches ø30 mm, 4-contact Emergency Stop Switch. Padlockable and flush bezel are available. • Padlockable, flush bezel, ø60mm jumbo mushroom, illuminated, LED push-on are available. • IDEC’s original “Safe break action” and reverse energy structure ensure the highest level of safety. • Safety lock mechanism (IEC 60947-5-5, 6.2) • Direct opening action mechanism (IEC 60947-5-5, 5.2, IEC60947-51, Annex K) • Short depth behind the panel – only 47.
Emergency Stop Switches ø30 XN Series Emergency Stop Switches XN Series Emergency Stop Switches Plastic Bezel Non-illuminated Pushlock Pull/Turn Reset (Screw Terminal) Shape ø40mm Mushroom Part No.
Emergency Stop Switches ø30 XN Series Emergency Stop Switches Flush Bezel Non-illuminated Pushlock Pull/Turn Reset (Screw Terminal) Shape ø40mm Mushroom Part No.
Emergency Stop Switches ø30 XN Series Emergency Stop Switches XN Series Emergency Stop Switches Padlockable Non-illuminated Pushlock Turn Reset (Padlockable) (Screw Terminal) Shape APEM ø44mm Mushroom Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products Explosion Proof Part No.
Emergency Stop Switches ø30 XN Series Emergency Stop Switches Dimensions w/Terminal Cover +0.5 0 +0 .5 0 47.7 33 .5 47.7 Panel Cut-out 33 Locking Ring Locking Ring Rubber Gasket M3 Terminal Screws ax. +0 .5 0 20.1 33.0 18.5 .5 +0.2 4.8 0 (*1) 8m ø30 +0.5 0 ax. 20.1 IP20 Fingersafe R0. +0.2 4.8 0 (*1) 8m ø30 33.0 R0. Non-illuminated 18.
Emergency Stop Switches ø30 XN Series Emergency Stop Switches Dimensions Flush Bezel 21 Locking Ring ø30 .5 60.4 Panel Cut-out Locking Ring Rubber Gasket 21 Panel Cut-out ø4 0 0 37 37 Emergency Stop Switches Enabling Switches +0 .5 0 Rubber Gasket M3 Terminal Screws ø4 Control Boxes 4.8 0 (*1) 33.0 33.0 60.4 M3 Terminal Screws w/Terminal Cover ax. 20.1 APEM Switches & Pilot Lights +0.2 8m ø41 +0 .5 0 ø41 18.5 .5 R0. 18.5 ax. +0.5 0 +0.2 4.8 0 (*1) 8m 20.
Emergency Stop Switches ø30 XN Series Emergency Stop Switches Dimensions ax. R0. +0.2 0 8m (*1) w/Terminal Cover Locking Ring Panel Cut-out 43 61.4 Locking Ring Rubber Gasket ø44 M3 Terminal Screws 4.8 +0.2 0 (*1) +0 .5 0 43 Panel Cut-out APEM ø44 59.9 61.4 .5 ax. 20.1 20.1 33.0 +0.5 0 +0 .5 0 ø30 +0.5 0 .5 18.5 IP20 Fingersafe 4.8 8m ø30 33.0 R0. Non-Illuminated 18.
Emergency Stop Switches ø30 XN Series Emergency Stop Switches Terminal Arrangement Terminal Arrangement (Bottom View) Applicable Crimping Terminal 6.0 max. 3.2 min. 1 2 1 6.0 max. 3.2 min. • Only solid wire can be used for IP20. 22 X2 42 Right 21 Wire 4.7 to 5.
Emergency Stop Switches ø30 XN Series Emergency Stop Switches Operating Instructions Removing the Contact Block First unlock the operator button. Grab the yellow bayonet ring ➀ and pull back the bayonet ring until the latch pin clicks ➁, then turn the contact block counterclockwise and pull out ➂. Installing & Removing Terminal Covers Bayonet Ring (yellow) Turn counterclockwise Grab Pull Latch Grab Notes for removing the contact block 1.
Emergency Stop Switches ø16 X6/XA Series Emergency Stop Switches Accessories Accessories and Replacement Parts (ø16 X6/XA Series Emergency Stop Switches) Description & Shape Material Part No. Package Quantity Remarks Ring Wrench Metal (nickel-plated brass) MT-001 1 • Used to tighten the locking ring when installing the XA emergency stop switch onto a panel. Polyamide XA9Z-LN 10 • Black PBT XA9Z-VL2 2 • White • Used for solder terminals. • Also applicable to the XW series.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches Accessories Accessories (ø22 XW Series Emergency Stop Switches) Description & Shape Material Part No. Package Quantity Ring Wrench Remarks • Used to tighten the locking ring when installing the XW emergency stop switch onto a panel. Metal (nickel-plated brass) (weight: approx. 150g) MW9Z-T1 8 ø2 110 1 APEM Switches & Pilot Lights Anti-rotation Ring • The anti-rotation ring is used for preventing the operator from turning. 1.
Emergency Stop Switches ø22 XW Series Emergency Stop Switches Accessories Nameplate (for ø22 Emergency Stop Switches) Description Legend For ø40mm Operator APEM For ø60mm Operator Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Package Quantity Part No.
Emergency Stop Switches ø30 XN Series Emergency Stop Switches Accessories Accessories and Replacement Parts (for ø30 XN Series Emergency Stop Switches) Name & Shape Material Part No. Package Quantity Remarks Terminal Cover XW9Z-VL2M PPE 2 IP20 Fingersafe Terminal Cover XW9Z-VL2MF Polyamide 2 • Black • Used for screw terminals. • Attached to IP20 protection cover units. APEM Switches & Pilot Lights • Black • Used to change terminal cover to IP20 fingersafe terminal.
Emergency Stop Switches XA/XW Series Emergency Stop Switches Switchguard Emergency Stop Guard for Machinery (Protective Shroud) If the safety requirements of ISO15380:2015 4.3.2 or 4.5 is satisfied, the switchguard can be used safely by combining IDEC’s switchguard and emergency stop switch, which is approved by TÜV Rheinland in ISO13850:2015 to be used as protective shroud with emergency stop switch.
EU2B ø30 EU2B Series Hazardous location Switches ø30 mm, up to 3 contacts for application in hazardous locations with explosive gases such as oil and gas, petrochemical, painting and more. Complying with IECEx and ATEX Directives, UL for hazardous environments, new 30mm EU2B Hazardous Location Switches provide increased safety for your applications.
Hazardous location Switches Part Numbers Part Number Contact Arrangement Operator EU2B-YBV301•R Weight (Approx.
EU2B Emergency Stop Switch Nameplate Stickers Appearance Legend Part Number Dimensions EU9Z-NVS0 Material: yellow vinyl Legend: black EU9Z-NVS27 8 ø5 Blank EM ERGENC ø4 0.5 EU9Z-NVS27 8 ø5 EM ERGENC Emergency EU9Z-NVS27 Stop ø4 0.5 ➀ (Turn) (Turn) ➂ locking lever (Pull) TOP locking lever locking lever ø4 STOP 0.5 The following padlocks and hasps can be used. (Lift) ➁ ➁ 8 ø5 Accessories : Padlock Cover ➀ EU2B-YL 0.
Hazardous location Switches Operating Instructions Maintenance and Inspection EU2B switches should be installed in an appropriate control box. Maintenance and Inspection Method Perform daily or periodical maintenance and inspection for items such as damage and temperature rise of the EU2B switches listed in the Maintenance and Inspection table below.
Emergency Stop Switches SEMI EMO Switches SEMI Emergency Off (EMO) Switches ø16mm XA Series EMO Switches (Solder Terminal) (Pushlock Turn Reset Switch) Shape Package Quantity: 1 NC Main Contact NO Monitor Contact Part No.
Emergency Stop Switches SEMI EMO Switch Guards Dimensions ø16mm XA Series EMO Switches ø22mm HW Series EMO Switches LOCK Locking Ring 21 27.2 19.8 8.7 17.9 +0.2 0 +0.2 0 41.4 .2 40 +0.2 0 25 1.7 ø16 26.5 Panel Thickness 0.5 to 3.7 Lock Lever APEM Panel Cut-out Switches & Pilot Lights Terminal Cover XA9Z-VL2 2 contact blocks 4 contact blocks 13 69.4 (4 blocks) 40 29.4 32 ø2 9. ø Bottom View 21 30.4 Emergency Stop Switches Enabling Switches 49.
Emergency Stop Switches SEMI EMO Switch Guards FB Series Control Box 4-M4 Tapping Screw Holes for Rear Mounting (Depth: 10mm) 2-Front Mounting Holes ø14 Knockout EMO Switch Switch Guard 76 21 41 76 Cover Mounting Screws 4 .6 2-ø 4 .6 2-ø 15.5 APEM 21 41 4-M4 Tapping Screw Holes for Rear Mounting (Depth: 10mm) 2-Front Mounting Holes ø14 Knockout EMO Switch 21 Cover Mounting Screws ø22mm HW Series EMO Switches + SEMI Switch Guard (HW9Z-KG3) 21 ø22mm HW Series EMO Switches 15.
Emergency Stop Switches SEMI EMO Switch Guards The combination of IDEC’s EMO switch guards and emergency stop switches are approved by TÜV Rheinland for compliance with SEMI S2 standards.
Emergency Stop Switches SEMI EMO Switch Guards SEMI S2 Compliant Switch Guards Switch Guards Series Description & Shape Package Quantity: 1 SEMI S2 ISO 13850 Part No.
Emergency Stop Switches SEMI EMO Switch Guards SEMI S2 Compliant Switch Guards Dimensions All dimensions in mm. XA9Z-KG1 HW9Z-KG1 42 35 APEM 23.1 Switches & Pilot Lights HW9Z-KG2 (0.2) 38 64 48 (0.2) 36.5 50 22 (0.2) 2.2 ø90 ø2 Safety Products ø1 Gasket 6 32 63 80 36 ø50 Emergency Stop Switches Enabling Switches ø57 Control Boxes Gasket Gasket 2 ø2 (1.7) (2) HW9Z-KG3 (2.2) HW9Z-KG4 HW9Z-KG5 Explosion Proof Terminal Blocks Relays & Sockets 35 42 35 50 (0.
Emergency Stop Switches SEMI EMO Switch Guards Installation ø16 mm ø22 mm TOP Marking TOP Marking TOP Marking TOP Marking TOP Marking TOP Marking TOP Marking TOP Marking APEM Locking Ring Operator Button Operator Button Panel Thickness: 1 to 2.2 Locking Ring Operator Button Panel Thickness: 1 to 2.2 Panel Thickness: 1.2 to 4 To tighten the locking ring, use locking ring wrench MT-100 and tighten to a torque of 0.88 N·m.
Stop Switches Wider variety with yellow button, white guard and nameplate According to SEMI S26-0308 Environmental, Health, and Safety Guideline for FPD Manufacturing Systems published in March 2008, the combination of a red button and yellow background cannot be used for switches that have only local or partial shut down functions. IDEC’s yellow button switch, white switch guard, and nameplate can satisfy the requirement.
Stop Switches ø22mm XW series Stop Switches Pushlock Pull / Turn Reset (Screw Terminal) Description & Shape 1NC 2NC 3NC 4NC 1NC 2NC 3NC 2NC ø40mm Mushroom • • • • Part No.
Stop Switches Nameplates (White) Shape Description Part No. For ø29mm Mushroom HAAV-0-W For ø49mm Mushroom HAAV4-0-W For ø40mm Mushroom HWAV-0-W For ø60mm Mushroom HWAV5-0-W For ø16mm Series For ø22mm Series Material Plate Color Legend Polyamide White (Munsell N9.5) Blank Dimensions For ø16mm Series (Nameplate for ø29mm Mushroom) 3.5 ø4 ø60 ø1 6 1.7 For ø22mm Series (Nameplate for ø40mm Mushroom) (Nameplate for ø40mm Mushroom) ø60 ø80 ø2 2 ø1 6 0.
