Datasheet

ManualsBrandsIDEC ManualsAutomationStraight Actuator

HS6E Subminiture Interlock Switches with Solenoid

Small interlock switch with five poles and solenoid.

Ideal for applications in tight spaces.

• Compact body: 75 × 15 × 75 mm

15-mm-wide, thinnest solenoid interlock switch in the world.

• Reversible mounting and angled cable allow four actuator insertion

directions.

• Energy saving. 24V DC, 110 mA (solenoid: 100 mA, LED: 10 mA).

Can be driven directly by a controller.

• Manual unlocking possible on three sides.

• LED indicator shows solenoid operation

Spring Lock

• Automatically locks the actuator without power applied to the sole-

noid.

• After the machine stops, unlocking is completed by the solenoid.

• Manual unlocking is possible on three sides in the event of power

fail ure or maintenance.

Solenoid Lock

• The actuator is locked when energized.

• The actuator is unlocked when de-energized.

•Flexible locking function can be achieved, for an application where

locking is not required and sudden stopping of a machine must be

pre vented.

Horizontal/Vertical Angle Adjustable Actuators

Straight Actuator

(SUS304)

Right-angle Actuator (SUS304)

Ratings

Contact Ratings

Rated Insulation Voltage (Ui) (Note 1)

300V (door monitor contact)

150V (lock monitor contact)

30V (between LED or solenoid and

ground)

Rated Thermal Current (Ith)

Operating temperature –25 to 35°C

2.5A (up to 2 circuits)

1.0A (3 or more circuits)

Operating temperature 35 to 50°C

1.0A (1 circuit)

0.5A (2 or more circuits)

Rated Voltage (Ue) 30V 125V 250V

Rated Current (Ie) *

Main & Lock

Monitor Circuits

Resistive load (AC-12) — 2A —

Inductive Load (AC-15) — 1A —

Resistive load (DC-12) 2A 0.4A —

Inductive Load (DC-13) 1A 0.22A —

Door Monitor

Circuit

Resistive load (AC-12) — 2.5A 1.5A

Inductive Load (AC-15) — 1.5A 0.75A

Resistive load (DC-12) 2.5A 1.1A 0.55A

Inductive Load (DC-13) 2.3A 0.55A 0.27A

•Minimum applicable load (reference value): 3V AC/DC, 5 mA

Approved ratings

TÜV UL/c-UL CCC

Door

Monitor

Contact

AC-15 240V/0.75A

DC-13 250V/0.27A

DC-13 30V/2.3A

240V AC/0.75A Pilot Duty

250V DC/0.27A Pilot Duty

C300

Q300

AC-15 240V/0.75A

DC-13 30V/2.3A

Lock

Monitor

Contact

AC-15 125V/1A

DC-13 125V/0.22A

DC-13 30V/1A

125V AC/1A Pilot Duty

125V DC/0.22A Pilot Duty

DC-13 30V/1A Pilot Duty

AC-15 125V/1A

DC-13 30V/1A

Solenoid/Indicator

Locking Mechanism Spring Lock Solenoid Lock

Rated Voltage 24V DC (100% duty cycle)

Rated Current

110 mA (solenoid 100 mA, LED 10 mA)

(initial value)

Solenoid

Coil Resistance 240Ω (at 20°C)

Pickup Voltage Rated voltage × 85% maximum (at 20°C)

Dropout Voltage Rated voltage × 10% minimum (at 20°C)

Maximum Continuous

Applicable Voltage

Rated voltage × 110%

Maximum Continuous

Applicable Time

Continuous

Insulation Class Class F

Indicator

Light Source LED

Illumination Color Green

Specifications

Applicable Standards

ISO14119

IEC60947-5-1

EN60947-5-1 (TÜV approved)

EN1088 (TÜV approved)

GS-ET-19 (TÜV approved)

UL508 (c-UL listed)

CSA C22.2 No. 14 (c-UL listed)

IEC 60204-1/EN 60204-1 (applicable standards for use)

Operating

Temperature

–25 to +50°C (no freezing)

Relative Humidity 45 to 85% (no condensation)

Storage Temperature –40 to +80°C (no freezing)

Pollution Degree 3

Impulse Withstand

Voltage

Main & lock monitor circuits: 1.5 KV

Door monitor circuit: 2.5 kV

Between solenoid/LED and ground: 0.5 kV

Insulation Resistance

(500V DC megger)

Between live and dead metal parts: 100 MΩ minimum

Between terminals of different poles: 100 MΩ minimum

Contact Resistance

300 mΩ maximum (initial value, 1m cable)

500 mΩ maximum (initial value, 3m cable)

700 mΩ maximum (initial value, 5m cable)

Electric Shock

Protection

Class II (IEC 61140)

Degree of Protection IP67 (IEC 60529)

Shock Resistance

Operating extremes: 100 m/s

(10G)

Damage limits: 1000 m/s

(100G)

Vibration Resistance

Operating extremes: 10 to 55 Hz, amplitude 0.35 mm

Damage limits: 30 Hz, amplitude 1.5 mm

Actuator Operating

Speed

0.05 to 1.0 m/s

Direct Opening Travel

8.0 mm minimum

Direct Opening Force

60N minimum

Actuator Retention

Force

500N minimum (GS-ET-19)

Operating Frequency 900 operations/h

Mechanical Durability 1,000,000 operations minimum (GS-ET-19)

Electrical Durability

100,000 operations minimum (rated load)

1,000,000 operations minimum (24V AC/DC, 100 mA)

(operating frequency 900 operations/h)

Conditional

Short-circuit Current

50A (250V)

(Use 250V/10A fast-blow fuse for short-circuit protection.)

Cable

UL2464, No. 22 AWG

(12-core: 0.3 mm

or equivalent/core)

Cable Diameter ø7.6 mm

Weight (approx.)

220g (1m cable)

410g (3m cable)

600g (5m cable)

Summary of content (13 pages)

PAGE 1
HS6E Subminiture Interlock Switches with Solenoid Small interlock switch with five poles and solenoid. Ideal for applications in tight spaces. ••Compact body: 75 × 15 × 75 mm 15-mm-wide, thinnest solenoid interlock switch in the world. ••Reversible mounting and angled cable allow four actuator insertion directions. ••Energy saving. 24V DC, 110 mA (solenoid: 100 mA, LED: 10 mA). Can be driven directly by a controller. ••Manual unlocking possible on three sides.
PAGE 2
Main Circuit: Monitor Circuit: Monitor Circuit: 11 21 31 12 22 32 41 53 42 54 HS6E HS6E Subminiture Interlock Switches with Solenoid Main Circuit: Monitor Circuit: Monitor Circuit: Standard Lock Mechanism Circuit Number 11 21 31 12 22 32 41 53 42 54 Contact Configuration (When inserted) (When ON) L M Spring Lock N P L M Solenoid Lock N Part No.
PAGE 3
0RQLWRU &LUFXLW 0RQLWRU &LUFXLW 0RQLWRU &LUFXLW $ ï $ $ ï $ with 0RQLWRU &LUFXLW Switches HS6E Subminiture Interlock Solenoid 5-circuit Independent Output Lock Mechanism Circuit Number VL VM Spring Lock VN VP VL VM Solenoid Lock VN 0RQLWRU &LUFXLW 0RQLWRU &LUFXLW Configuration 0RQLWRU &LUFXLW Contact Lock Monitor Monitor 0RQLWRU &LUFXLW Door (When inserted) (When solenoid is OFF) 0R
PAGE 4
HS6E HS6E Subminiture Interlock Switches with Solenoid Actuator Shape Part No. Remarks Straight Actuator HS9Z-A61 The retention force of HS9Z-A61 actuator is 500N maximum. Do no apply excessive load, otherwise the actuator may fall off the door. HS9Z-A62 The retention force of HS9Z-A62 actuator is 100N maximum. Do no apply excessive load, otherwise the actuator may fall off the door. When retention force of 100N or more is required, use the HS9ZA62S actuator.
PAGE 5
HS6E Subminiture Interlock Switches with Solenoid Dimensions • Mounting Hole Layout Interlock Switch 5.5 3-M4 Screw (ø4.3 or M4 tapped hole) Hole for Manual Unlocking ø12 (reference) 15 37 46.1 41.8 ø4 (22.5) 28.5 20 to 22 Manual Unlocking Key 4 4 Hole for Manual Unlocking ø12 (reference) 3-M4 Screw (ø4.3 or M4 tapped hole) 20 1 20.5 1 30 C 12 .3 ) .1 R2 (2 Use three mounting screws to install the interlock switch.
PAGE 6
HS6E HS6E Subminiture Interlock Switches with Solenoid Dimensions Straight Actuator (HS9Z-A61) The retention force of the HS9Z-A62 actuator is 100N. When tensile force exceeding 100N is expected, use the HS9Z-A62S actuator. 43.2 20.9 Right-angle Actuator with Mounting Plate (HS9Z-A62S) Right-angle Actuator (HS9Z-A62) Note: See page 23 for actuator installation. (15.8) When mounted (33.8) 0.8 When mounted (33.8) When mounted (5.6) 0.8 0.8 When mounted (10.
PAGE 7
HS6E Subminiture Interlock Switches with Solenoid Circuit Diagrams and Operating Characteristics Standard – Spring Lock Status 1 Status 2 • Door closed • Machine ready to operate • Solenoid de-energized Interlock Switch Status Status 3 • Door closed • Machine cannot be operated • Solenoid energized Status 4 • Door open • Machine cannot be operated • Solenoid energized • Door open • Machine cannot be operated • Solenoid de-energized Unlocking using Manual Unlock Key • Door closed • Machine cannot be
PAGE 8
HS6E HS6E Subminiture Interlock Switches with Solenoid Standard – Solenoid Lock Status 1 Status 2 • Door closed • Machine ready to operate • Solenoid energized Interlock Switch Status Status 3 • Door closed • Machine cannot be operated • Solenoid de-energized Status 4 • Door open • Machine cannot be operated • Solenoid de-energized • Door open • Machine cannot be operated • Solenoid energized Unlocking using Manual Unlock Key • Door closed • Machine cannot be operated • Solenoid de-energized Door
PAGE 9
HS6E Subminiture Interlock Switches with Solenoid 5-circuit Independent Output – Spring Lock Status 1 Status 2 • Door closed • Machine ready to operate • Solenoid energized Interlock Switch Status Status 3 • Door closed • Machine cannot be operated • Solenoid energized Unlocking using Manual Unlock Key Status 4 • Door open • Machine cannot be operated • Solenoid energized • Door open • Machine cannot be operated • Solenoid deenergized • Door closed • Machine cannot be operated • Solenoid deenergiz
PAGE 10
HS6E HS6E Subminiture Interlock Switches with Solenoid 5-circuit Independent Output – Solenoid Lock Status 1 Status 2 • Door closed • Machine ready to operate • Solenoid energized Interlock Switch Status Status 3 • Door closed • Machine cannot be operated • Solenoid deenergized When using Manual Unlock Key Status 4 • Door closed • Machine cannot be operated • Solenoid deenergized • Door open • Machine cannot be operated • Solenoid energized • Door closed • Machine cannot be operated • Solenoid de
PAGE 11
HS6E Subminiture Interlock Switches with Solenoid Safety Precautions ••In order to avoid electric shock or fire, turn power off before installation, removal, wiring, maintenance, or inspection of the interlock switch. ••If relays are used in the circuit between the interlock switch and the load, use only safety relays, since welded or sticking contacts of standard relays may invalidate the functions of the interlock switch.
PAGE 12
HS6E HS6E Subminiture Interlock Switches with Solenoid When using the HS9Z-A65/HS9Z-A66 Angle Adjustable Actuator • When the door hinge is on the extension line of the interlock switch surface Vertical Adjustment Horizontal Adjustment Minimum Radius Door Hinge 50 mm Minimum Radius Door Hinge 50 mm HS9Z-A65 HS9Z-A66 HS9Z-A65 50 mm Minimum Radius Label Minimum Radius Door Hinge 50 mm HS9Z-A65 HS9Z-A66 When using the manual unlock key Manual Unlocking (installed on both sides) Label HS9Z-A65 Door
PAGE 13
HS6E Subminiture Interlock Switches with Solenoid Recommended Tightening Torque of Mounting Screws ••Interlock switch: 1.0 to 1.5 N·m (three M4 screws) ••Actuators: 1.0 to 1.5 N·m (two M4 screws) ••The above recommended tightening torques of the mounting screws are the values with hex socket head bolts. When other screws are used and tightened to a smaller torque, make sure that the screws do not become loose after mounting.