Installation Guide

by St. Simons, Inc.
Quality Solid Brass Decorative Hardware & Bath Accessories
“The Special Finishes Specialist” ©
idhbrass.com
Installation Instructions
Premium Grade Solid Brass
8” Heavy Duty Surface Bolt with Round Knob
Item# 11272
Dimensions:
• Bullets: 2
• Guides: 2
• Guide Weight: 1 oz
• Knob Weight: 3 oz
• Throw: 1”
• Knob Projection: 1”
• Item Weight: 10 oz.
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
The instructions below are for reference only. Depending on
application, install may vary. Always consult a professional.
1. Determine the bolt mounting location. Also determine which
type of strike will be used.
2. Hold the bolt from the edge of the door when retracted. Place
the bolt on the door with the guides in position and use a
pencil to mark the hole locations.
3. Drill pilot holes in the locations marked in the previous step.
4. Secure the bolt to the door with the provided mounting
hardware.
5. If needed, mortise location for the strike. Mark and drill pilot
holes for the screws. Mount strike with provided hardware.
Catalog Section: B
8” Surface Bolt with Round Knob
Item# 11272
Date: Rev 07/20