Manual

EBC-2100
IEI Technology Corp.
Page 5
If additional hard drive storage is required, simply remove the HDD bracket from the chassis.
Then connect the hard drive to the HDD bracket, plug the HDD cable to the hard drive, and
assemble the HDD bracket with HDD back into the chassis. The connector of the hard drive
should be at the opposite side of the power switch after installation.
Step 4
An optional 40mm cooling fan can accommodate in EBC-2100. The arrow sign on the
cooling fan indicates the direction of airflow and it should point outside the chassis.
HDD bracket
Power switch
EBC-2100
IEI Technology Corp.
Page 6
Step 5
Before installing CPU board into the chassis, CPU, Memory, heatsink and CPU cooling fan
must be secured properly onto the CPU board. To prevent heatsink deformation, please
handle the heatsink diagonally.
Step 6
Unscrew the COM port/VGA port with proper tool.
Step 7
Align the motherboard with the chassis standoffs, secure with screws for motherboard and
COM port and VGA port.
Step 8
Align the power cable into the embedded board.