User Manual

ICELOG-07 Mobile Elite Manager
Page 10
To unpack the panel PC, follow the steps below:
WARNING!
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the system has been
properly installed. This ensures the screen is protected during the
installation process.
Step 1: Use sharp cutters to open the box.
Step 2: Remove the ICELOG-07and the packing material out of the box.
Step 3: Make sure all the components listed in the packing list are present. Step 0:
2.1 Packing List
NOTE:
If any of the components listed in the checklist below are missing, do
not proceed with the installation. Contact the IEI reseller or vendor the
ICELOG-07 was purchased from or contact an IEI sales representative
directly by sending an email to
[e-mail].