USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands Model No. : PL2760Q We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com You can access the Web page of different countries from there. We reserve the right to change specifications without notice.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS .........................................3 ENGLISH CUSTOMER SERVICE ...................................................................3 CLEANING ......................................................................................3 BEFORE YOU OPERATE THE MONITOR ....................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION ENGLISH The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1080 High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness 350cd/m2 (Typical) ENGLISH Quick Response Time 1ms (Gray to Gray) Supports AMD FreeSync™ technology (through HDMI/DisplayPort-inputs) Flicker - Free Blue Light Reducer Digital Character Smoothing Automatic Set-up 2 × 2W Stereo Speakers Plug & Play VESA DDC2B Compliant Windows® 7/8.
WALL MOUNTING When you use with the wall mounting, in consideration of thickness of the mounting WARNING stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. Please check if the wall or ceiling can support the weight of the monitor before mounting it.
FITTING AND REMOVAL OF BASE CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. ENGLISH Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down. Hold the monitor and push the Stand-Base.
ENGLISH CONTROLS AND CONNECTORS Power Indicator Normal operation NOTE Blue: Orange: Power Management Power Switch ( ) Menu / Select Button (ENTER) Scroll Down / Volume Button ( / Scroll Up / ECO Mode Button ( ) / ) Exit Button (EXIT) Input Select Button (INPUT) Speakers USB Downstream Connector ( USB Upstream Connector ( ) ) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer. ENGLISH NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 22: COMPLIANT TIMING. ADJUSTING THE HEIGHT AND THE VIEWING ANGLE of the monitor, then adjust the monitor’s height and angle to your own preference. 130mm Hold the panel so that the monitor does not topple when you change the monitor’s height or angle. You are able to adjust the monitor's height up to 130mm, angle up to 45 degrees right and left, 22 degrees upward and 5 degrees downward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 22. You are also able to adjust the picture by following the button operation shown below. ENGLISH Press the ENTER Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons.
ADJUSTMENT MENU CONTENTS Picture Adjust Problem / Option Contrast *2 Too dull Too intense Brightness *1,2,3 Too dark Too bright Off / -2 / -1 / 0 / +1 / +2 It will improve the gray level response time of the LCD panel. A higher level results in a faster response time. Off Typical Contrast Ratio Overdrive Adv. Contrast ECO Mode Blue Light Reducer Black Tuner Button to Press Direct Direct On Increased Contrast Ratio Off Normal Mode1 Brightness of back-light is reduced.
Input Select Adjustment Item Input Select Direct Problem / Option Select the Digital (DVI) input. HDMI Select the Digital (HDMI) input. DisplayPort Select the Digital (DisplayPort) input. Search for an available input source and select automatically. Auto ENGLISH Button to Press DVI NOTE Input source is fixed, not selected automatically when DVI, HDMI and DisplayPort which are selected.
Store User Setting Adjustment Item Store User Setting Problem / Option Button to Press User Mode 1 Save the settings of the screen adjustment. User Mode 2 Save the settings of the screen adjustment. User Mode 3 Save the settings of the screen adjustment. The following settings can be memorized: Contrast, Brightness, Overdrive, Adv.
Image Adjust ENGLISH Adjustment Item i-Style Color * 1 Problem / Option Button to Press Off Return to a state set by color adjustment except i-Style Color. Standard For general windows environment and monitor default setting. Sport Game For Sports game environment. FPS Game For FPS game environment. Strategy Game For Strategy game environment. For text editing and viewing in a word Text processing environment. User Mode 1 Applies customized monitor settings.
Language Language Problem / Option English Français Deutsch Italiano Polski Español English French German Italian Polish Spanish Button to Press Nederlands Dutch Czech Ĉesky Russian Japanese Simplified Chinese ENGLISH Adjustment Item Setup Menu Adjustment Item Problem / Option H.Position OSD is too left OSD is too right V.
Display Information Displays information regarding the current input signal coming from the graphic card in your computer. Display Information ENGLISH 1920x1080 @60Hz NOTE See your graphic card user guide for more information about changing the resolution and refresh. Reset Adjustment Item Reset All 16 OPERATING THE MONITOR Problem / Option No Return to Menu. Yes Factory-preset data is restored.
● Lock Mode 1. The OSD lock will be activated by pressing the front button ENTER for about 10 seconds. If you try to access the OSD by pressing any of the buttons, message "OSD Locked" will appear on the screen. 2. The OSD lock will be deactivated by pressing the front button ENTER again for about 10 seconds. 1. The power switch lock will be activated by pressing the front button for about 10 seconds.
POWER MANAGEMENT FEATURE ENGLISH The power management feature of this product complies with power saving requirement of VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by the operating system.
TROUBLE SHOOTING 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
ENGLISH Problem Check The screen is shaking. The power voltage is within the specification of the monitor. The signal timing of the computer is within the specification of the monitor. No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS LCD Panel 27" Panel technology TN Size Diagonal: 27" (68.5cm) Pixel pitch 0.233mm H × 0.233mm V Brightness 350cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical) Response time Display Colors Sync Frequency Native Resolution Support max.
DIMENSIONS 613.5mm/24.2” 609.0mm/24.0” ENGLISH ( 230.0mm/9.1” 341.5mm/13.4” 370.5mm/14.5” 397.5mm/15.6”(527.5mm/20.8”) 54.0mm/2.1” 300.0mm/11.8” ) : Maximum adjustment range COMPLIANT TIMING Video Mode VESA VGA 640 × 480 SVGA 800 × 600 XGA 1024 × 768 SXGA UXGA WSXGA+ 1280 × 1024 1600 × 1200 1680 × 1050 Full HD 1920 × 1080 WQHD 2560 × 1440 Horizontal Frequency 31.469kHz 37.879kHz 46.875kHz 48.363kHz 60.023kHz 79.980kHz 75.000kHz 65.290kHz 66.590kHz 166.442kHz 88.787kHz 221.