User manual

English

6. Connect your headphones, mixer or powered speakers to the iOS device headphone jack to monitor your

recording.

Mac

1. Connect the included Micro USB to USB cable to iRig Mic HD.

2. Connect the USB cable to a free USB port on your Mac, the status LED on iRig Mic HD will turn dark blue.

3. Launch any Core Audio-compatible application and select iRig Mic HD as the input device from the audio

preferences. The status LED on iRig Mic HD will turn bright blue.

4. Start talking or singing into iRig Mic HD , and then adjust the input level as required using the gain knob.

5. Connect your headphones, mixer or powered speakers to the headphone jack on your Mac to monitoring

your recording.

WARNING: Permanent hearing loss may occur if earbuds or headphones are used at high

volume. You can adapt over time to a higher volume of sound, which may sound normal but can

be damaging to your hearing. Set your device volume to a safe level before that happens. If you

experience ringing in your ears, reduce the volume or discontinue use of earbuds or headphones

with your device.