User manual

Care and cleaning
Caution! Before carrying out any
maintenance operation, disconnect the
power supply.
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging
must therefore only be carried out by author-
ized technicians.
Warning! The accessories and parts of
the appliance are not suitable for
washing in a dishwasher.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with luke-
warm water and some neutral soap.
• regularly check the door seals and wipe
clean to ensure they are clean and free
from debris.
• rinse and dry thoroughly.
Important! Do not pull, move or damage any
pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as this will dam-
age the surface and leave a strong odour.
Once a year remove the ventilation grill at
the base of the appliance and clean the air
channels with a vacuum cleaner. This opera-
tion will improve the performance of the ap-
pliance and save electricity consumption.
Important! Take care of not to damage the
cooling system.
Many proprietary kitchen surface cleaners
contain chemicals that can attack/damage
the plastics used in this appliance. For this
reason it is recommended that the outer cas-
ing of this appliance is only cleaned with
warm water with a little washing-up liquid
added.
After cleaning, reconnect the equipment to
the mains supply.
Defrosting of the refrigerator
Frost is automatically
eliminated from the
evaporator of the re-
frigerator compart-
ment every time the
motor compressor
stops, during normal
use. The defrost water
drains out through a
trough into a special
container at the back of the appliance, over
the motor compressor, where it evaporates.
It is important to periodically clean the de-
frost water drain hole (F) situated under the
salad drawers to prevent the water overflow-
ing and dripping onto the food inside. Use
the special cleaner provided (P), which you
will find already inserted into the drain hole.
Cleaning the air channels
1. Remove the plinth (1), then the ventilation
grid (2);
2. Clean the ventilation grid (2).
3. Carefully pull the air deflector out (3),
checking that there is no water left from
the defrosting.
4. Clean the lower part of the appliance
with a vacuum cleaner.
P
F
321
ENGLISH 9