User Manual

6
Getting Started
Openlid(9&19)andinsert3xAAA/HR03NiMHbatteriesinbothparentunitand
babyunitwithcorrectpolarity.
Connectwalladapterdcplugintobabyunitconnector(2)
How to use
A, Baby Unit
1.SwitchthepoweronbyturningtheOn/Oswitch(1)from0to1.Whenthe
powerison,theBatteryindicator(4)lightsupgreen.Iftheindicatorstarts
blinkingred,theunitneedstobecharged.
2.Youcanadjustthesensitivityofthemicrophonefrom1to3usingthe
Microphonesensitivitycontrol(1).Themicrophoneismostsensitivetosound
whenitissetto3,andleastsensitivewhenitissetto1.Ifthereisalotof
backgroundnoise,it’sagoodideatolowerthemicrophonesensitivity.Ifthe
surroundingsarequiet,themicrophonesensitivitycanbesethigher.
3.Youcansearchfortheparentunitbypressingsearchbutton(3).Pressingthe
buttonwillmaketheparentunitemitanoticationsoundfor20seconds.
Longpressonthetalkbackbuttonontheparentunitwillturnthenotication
soundo.
4.TheRange/Transmittingindicator(5)lightsupgreenwhenitpicksupsound.
Solidgreenwhenparentunitiswithinrange.Flashingredwhenparentunitis
outofrange.
5.Placethebabyunitnearyourchild,withthemicrophonefacingthechild.Make
suretheunitiscloseenoughtopickupsoundsfromyourchild,butnotso
closethatyourchildcanreachit.0.9meter(3ft)isagooddistance.
B, Parent Unit
NOTE! Makesuretheparentunitisatleastacoupleofmetersawayfromthe
babyunitbeforeyouswitchiton.Iftheunitsaretooclosetoeachother,feedback
betweentheunitscancreatealoudscreechingnoise.
1.SwitchthepoweronbyturningtheOn/Oswitch(10)from0to1.Whenthe