User's Manual

70-M USER’S MANUAL
70-M V1.1 (05/07) 120009-0D.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso. 13
70-M V1.1 (05/07) 120009-0D.pdf IKUSI reserves the right to modify this information without prior notification.
6.- RADIO REMOTE SYSTEM FUNCTIONALITIES
6.1.- GENERALS
6.2.- BATTERY LEVEL INDICATION
TRANSMITTER’S MODEL T70MH3D
Full battery: three black LED’s + frame. [▓ ▓ ▓]
Medium battery: two black LED’s + frame. [__▓ ▓]
Low battery: one black LED + frame. [___ ▓]
Empty battery: Blinking frame. [_____]
TRANSMITTER’S MODEL T70MH3 / T70MG10 / T70MH2
Low battery state will be indicated with red LED blinking and intermittent buzzer’s sound (pulses of 0.1 sec. every
0.9 sec.: __/\_____________/\________).
The transmitter models without LCD display have restrictions with the access to the programation
parameters, due to the impossibility to show the Software Menu in the Programming Mode.
The remote system’s receiver remembers the last ID used by the last current working transmitter.
This transmitter can be considered as the receiver’s owner. It means that if the receiver is going to
be used with another transmitter with a different ID, the receiver must released the current
transmitter’s ownership releasing the current ID code (LIB ID).This operation can be performed
from the current or a new transmitter (performing LIB ID special function) or by pressing the LIB ID
button inside the receiver.
In double step keypads the fast access functions are always activated with the first step (first speed)
The working channel used for Tele-Alignment purposes (Remote Programming) as well as the remote
downloading of parameters is the CURRENT WORKING CHANNEL.
For the lost transmitter searching function, ID release function and ID auto-teaching function the
system uses a RESERVED CHANNEL (Allways the last useful and available channel in each ISM
band).