User's Manual

70-M USER’S MANUAL
70-M V1.1 (05/07) 120009-0D.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso. 17
70-M V1.1 (05/07) 120009-0D.pdf IKUSI reserves the right to modify this information without prior notification.
6.5 AUTO TEACHING MODE (AUTO ID) (TRANSMITTER MODELS:T70MG10;T70MH3D;T70MH3;T70MH2)
Receiver’s serial numbe
r
T70MG10 TRANSMITTER MODEL
It allows to re
g
ister a new transmitte
r
into the receiver’s database -new ID-
(
maximum = 32 ID
)
+
1
)
With the transmitter switched off,
p
ress “ON/OFF”. Transmitter in stand-b
y
or LOW CONSUMPTION mode.
2) To enter in LIB ID mode, press simultaneously “UP” and “START” functions, until the orange
LED lights on. Insert the receiver’s serial number (see the procedure in Note 1 page 15 in this
Manual), and then press “START” function to validate.
If the receiver receives the right serial number the ID code is stored. During the recording process
the LED blinks in orange colour, indicating that the new ID is beeing updated in the receiver.
When finished the LED lights off and the transmitter sets to stand-by or LOW CONSUMPTION mode.
T70MH3 / T70MH2 and T70MH3D TRANSMITTER MODELS
+
********
It allows to re
g
ister a new transmitte
r
into the receiver’s database -new ID-
(
maximum = 32 ID
)
1
)
With the transmitter switched off,
p
ress “ON/OFF”. Transmitter in stand-b
y
or LOW CONSUMPTION mode.
2) To enter in LIB ID mode, press simultaneously “UP” and “START” functions, until the orange
LED lights on. Insert the receiver’s serial number (see the procedure in Note 1 page 15 in this
Manual), and then press “START” function to validate it.
If the receiver receives the right serial number, the ID code is stored. During the recording process
the LED blinks in orange colour, indicating that the new ID is beeing updated in the receiver.
When finished the LED lights off and the transmitter sets to stand-by or LOW CONSUMPTION mode.
Receiver’s serial numbe
r
Remark (for the T70MH3D model):
The blinking asterisk in the display, idicates the position of the digit that is introducing and storing at that moment.