User's Manual

70-M USER’S MANUAL
70-M V1.1 (05/07) 120009-0D.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso. 25
70-M V1.1 (05/07) 120009-0D.pdf IKUSI reserves the right to modify this information without prior notification.
6.8.3.- OUTPUT PROGRAMMING MODES (TELE-ALIGNED)
In LATCHING output mode the outputs remain active, once the order has been pressed until: a) the
same order is pressed again; b) the ON/OFF function is pressed. They can be programmed in ramp
mode (soft start and soft stop programmable independently) or ON/OFF mode.
M
I
= Whatever 10 functions or generic keypad orders ( 1, 2, 3……….8, 9 10)
OUTPUT PROGRAMMING WITH ONE STEP KEYPAD: “LATCHING” OUTPUT MODE.
M
E
= ON
(Press one order)
M
E
= ON / ON / OFF
(Press again the active order or press ON /OFF
V
MAX
= 100%
V
MAX
= XX %
1
)
RAMP-UP PROGRAMMING
(
RAMP= ON
)
M
E
= ON / M
E
= ON / OFF
(Press again the active order or press ON /
OFF)
M
E
= ON
(Press one order)
V
MAX
= 100%
2
)
ON/OFF PROGRAMMING
(
RAMP= OFF
)
RAMP = OFF
V
MAX
= 100%
RAMP = ON
T
1
T
2
V
MAX
= 100%
In MOMENTARY mode, the outputs remain actives while the orders are pressed. They can be
programmed in ramp mode (soft start and soft stop programmable independently) or ON/OFF
mode.
M
I
= Whatever 10 functions or generic keypad orders ( 1, 2, 3……….8, 9 10)
In Menu 2.0.5.x.0 OUTMODE: select “MOMENTARY” for MOMENTARY OUTPUT and “LATCHING” FOR
LATCHED (LOCKED) OUTPUT.
OUTPUT PROGRAMMING WITH ONE STEP KEYPAD: “MOMENTARY” OUTPUT MODE or “LATCHING”
OUTPUT MODE.
1
)
RAMP-UP PROGRAMMING
(
RAMP= ON
)
2
)
ON/OFF PROGRAMMING
(
RAMP= OFF
)
M
I
= ON ▲ M
I
= OFF ▼
V
MAX
= 100%
In 2.0.5.x.1 software menu SOFT START, select:
ON to enable ACCELERATION RAMP
OFF to disable ACCELERATION RAMP
In 2.0.5.x.2 software menu SOFT STOP, select:
ON to enable DEACCELERATION RAMP
OFF to disable DEACCELERATION RAMP
M
I
= ON ▲
(Press Order)
M
I
= OFF ▼(Depressed order)
V
MAX
= 100%
V
MAX
= XX %