Instructions / Assembly

10
Installing Down rod.
Lift fan assembly onto mounting bracket. Fig.8
Ensure the notch of ball joint is positioned on the stopper of mounting bracket to prevent
Fan from rotating when in operation. Fig. 9
Secure the safety cable to ceiling joist or structure member support cable.
NOTE: Ceiling support cable cannot be secured to outlet box only, it must be directly secured to
ceiling joist or structural member using the 3/16”x 35mm wooden screw and washer.
Using the 3/16”x 35mm wooden screw and flat
washer, attach safety cable to ceiling joist or wood
structural member. The wooden screw will pass
through the flat washer, safety cable loop, and into
the building structures. You will first drill a
3.5mmpilot hole into the building structure to
prevent splitting or cracking.
Make sure the electrical supply wires, including
the mounting bracket grounding wire and safety
cable is pulled through the down rod, between
the mounting bracket and the outlet box so that
electrical connections can be made later
WARNING
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
To avoid possible shock, do not pinch wires between the
down rod/hanger ball assembly and the hanger bracket.