Instructions / Assembly

11
Connect wires to supply/grounding wires using connectors as shown below.
After making the wire connections, the wire should be spread apart with the grounded Conductor
(neutral Wire) and the equipment-grounding conductor (Ground Wire) on one side of the outlet box
and the ungrounded conductor (Live Wire) on the other side of the outlet box.
The splices after being made should be turned upward and pushed carefully up into the outlet box.
※Use wire cap to connect the wires according to Figure 11. Ground wires are connected
using a larger wire cap.
WARNING
FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A LICENSED
ELECTRICIAN
Once the connection has been made, slide the receiver into the mounting bracket, taking care
not to pinch the wires. The canopy comes up to cover the receiver and mounting bracket.
Figure 11