Instructions / Assembly

2
Read instructions carefully before assembling or installing your fan. It is important that you
observe all safety information to help prevent personal injury and/or property damage.
1. To ensure the success of the installation be sure to read the instructions and study the
diagrams thoroughly.
2. For your safety, all electrical connection and disconnection must be performed by a Licensed
Electrician, in accordance with the National Electrical Code, ANSI/NFPA 70.
3. All electrical work should only be undertaken after disconnection of the power by turning off
the electrical supply.
4. Make sure that your installation location will not allow the rotating fan blades to come into
contact with any object and that there is a minimum clearance of 30cm from the blade tip to the
wall or nearest object. Please note that the bigger this clearance is the better the airflow from
your fan will be. Ensure the blades are mounted at a minimum height of 2.1 meters from the
floor when the fan is installed.
5. The fan must be earthed.
6. Do not connect the fan motor to a dimmer switch. This may give an unsatisfactory
performance (motor hum) and cause damage to the motor. Only use the supplied fan controller.
7. It is not recommended that ceiling fans and gas appliances be operated in the same room at
the same time.
8. The fan must be turned off and stopped completely before reversing the fan direction. This
will prevent any damage to the motor of the unit or controller.
9. Do not insert anything into the fan blades while the fan is operating, as this may cause
personal injury, damage the blades, and upset the balance of the unit causing it to wobble.
10. After the fan is completely installed make sure that all connections are secured and tightened
to prevent any noise problems from loose parts.
11. Because of the fan’s natural movement, some connections may loosen. Check the support
connections, brackets and blade attachments twice a year to make sure they are all secured. If
they are loose, tighten with a screw driver.
12. This ceiling fan is suitable for use with solid-state speed controls.
WARNING - To Reduce The Risk Of Personal Injury, Do Not Bend The Blade Brackets When
Installing The Brackets, Balancing The Blades, Or Cleaning The Fan. Do Not Insert Foreign Objects
In Between Rotating Fan Blades.
WARNING - To Reduce The Risk Of Fire, Electric Shock, Or Personal Injury, Mount To Outlet Box
Marked "Acceptable for Fan Support of 15.9 kg (35 lbs) or less" And Use Mounting Screws
Provided With The Outlet Box.
13. Check that the outlet box is securely installed in place such that it is able to support at least
the fan weight.
WARNING - To Reduce The Risk Of Electric Shock, This Fan Must Be Installed With An Isolating
Wall Control/Switch.
14.The wall switch used shall have been investigated and found acceptable for use as a
general-use switch.
Note: The important safeguards and instructions given in this manual are not meant to cover all
possible conditions and situations that may occur. It must be understood that common sense,
caution and care are factors, which cannot be built into any product. The persons caring for and
using the unit must supply these factors.
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS